245 Gallon Custom new build with basement "fish room"

[Dreadnaught]

Tank is 245G Custom Build by Great Lakes Aquariums (http://www.greatlakesaquariums.com/)
... 5' x 30" x 30"

Sump (120 G) and refugium (150 G):

10' x 13' Fish Room is in progress:

Refugium will go on top shelf of steel rack. It will gravity feed to the sump that will be on a lower rack. The return pump (Iwaki 100RLT) will be off the stand where the iwaki box is in the pic. At the other end of stand I will have 16 outlets fed by 2 circuits for heaters, ATO and other equipment.

The 3 boxes stacked up will be a sink, where the table is I will have a counter top. Single box represents QT. I will have 8 outlets near it.

Trash cans represent water changing station. I'm thinking 200gallon each (fresh/salt) for water mixing station. (Full bucket mixing)

Any suggestions or am I missing anything in "Fish Room"? (Other than additional outlets)

245lbs of Pukani Dry Rock has been curing for 9+ weeks.

 

[Dreadnaught]

 

[TighTT]

Drains in the floor would be a nice touch. I'm in the process of building my "fish room" and thats part of my plan.

 

[Dreadnaught]

TighTT. I agree. However I don't feel like cutting away my basement floor. I am going to have an ejected pump to remove the water from my sink. I also made it possible to raise the floor with 2x4s and add a drain under that.

 

[soggytees]

Sweet! Following!

 

[revhtree]

Loving it!

 

[Dreadnaught]

 

[Dreadnaught]

Electrical and insulation completed. Also took advatage of BRS Black Friday Sale: Went with Skimz SM252 External Protein Skimmer (Italian pumps) and Apex ready Waveline DC 10000 pump.

 

[rayn]

Nice! Following along

 

[Dreadnaught]

I took a small step backwards after I realized I forgot to plumb the sink and power for the ejector. Got it roughed in this week, finished insulating and also added some canister lights the will light the refugium. I also ordered 10' of cabinets from HD yesterday.

 

[markalan]

Living the dream.

 

[Dreadnaught]

After consulting with brother in-law, I decided to put the return pump outside the fish room for two reasons. 1) reduce the extra head pressure that would be associated with multiple bends (and maintain higher flow) 2) reduce room noise. Moved the switch and outlets to outside the room. Hung the majority of drywall as well.

 

[Dreadnaught]

Finished mudding, added a 4" vent to deal with humidity, sealed up ceiling. Hope to paint this week.

 

[revhtree]

Nice fish room!

 

[ws6kid]

Looking great!

 

[Dreadnaught]

Two coats of Primer - done.

 

[Dreadnaught]

A little trim work and the room is done.

 

[revhtree]

Dude awesome job!

 

[Dreadnaught]

QT's set up. Water change (2 X 210G) and ATO tanks arrived. Focus has moved to plumbing the DT. Top of tank done and under the tank is nearly done. Heading to the Michigan Frag swap for the day.

 

[cane]

Very nice. Did you reinforce the floor below?