False Wall Material for DIY AIO tank build

[JCSReefing]

I am going to build a AIO tank with a 20g long with a false wall. My question is what besides black acrylic can be used for this? I know you could do glass painted with krylon fusion to make black but I have read mixed reviews. Some say its reef safe and others say over time is not.
Any input and help on meterials that are 100% reef safe would be a great help.

 

[JCSReefing]

anyone know if i could use thsi material for the false wall?

http://go.redirectingat.com/?id=859...al-for-false-wall-in-aio-tank.290955/&xtz=360

 

[cromag27]

Abs

 

[JCSReefing]

It should not abs

 

[TbyZ]

How about using a 3mm thick black acrylic sheet sandwhiched between 2 pieces of 3 mm glass.

The acrylic could be sized slightly smaller than the glass & a bead of silicone along each edge used to bind the two glass sheets together.

 

[cromag27]

It should not abs

A lot of manufacturers use abs.

 

[Rybren]

I built a 10G AOI and just used acrylic painted with fusion. When I sold it 3 years later, none of the paint had lifted

 

[JCSReefing]

I built a 10G AOI and just used acrylic painted with fusion. When I sold it 3 years later, none of the paint had lifted

So you had nothing leeching signs of that from the fusion paint?

 

[Rybren]

No. I've also used it on PVC pipe without issue. It seems to be inert once it is fully cured.

 

[JCSReefing]

That would be the easiest way to just paint up glass but just worried about it leeching.

 

[cromag27]

I built a 10G AOI and just used acrylic painted with fusion. When I sold it 3 years later, none of the paint had lifted

Fusion is a plastic-specific paint.

just about all spray paints are fine once cured and off-gassing is finished.

 

[cromag27]

That would be the easiest way to just paint up glass but just worried about it leeching.

I don't know if any paint that won't eventually chip or peel off glass, even if just the smallest amount.

Why are you refusing to use acrylic or abs?

 

[mkj]

use vinyl. Have had mine for 3 years inside chamber and hasn't pealed. Also used the vinyl on outside chamber area, looks great.