- Joined
- Jul 27, 2016
- Messages
- 614
- Reaction score
- 418
Several Return pumps allow external 0-10v flow adjustments.
These types of pumps can very easily be controller through the ProfiLux and it's available 0-10v L ports (Yellow)
To get started, you need to have either:
With this we can set the speed/flow of the pump, throttle it down at night time, increase for thunderstorm and/or decrease for feedings.
In my example, we're going to set the return pump for consistent flow - no wave motion or increase/decrease during normal use.
It's all in the Stream Group setting. In my case, I use Streamgroup 8, I added my RD3 10v interface on L3 to the group, and set it:
Mode: Permanent
Waves: no waves
* Add Pump#: 3
We will set the running power to 60%, 25% during Feed Cycle, and 100% for wild flow during thunderstorms.
Edit pump 3 for:
Minimum: 25
Maximum: 60 (running power)
Night: 40
Thunderstorm: 100
Behavior for feed: minimum
Please let me know if you have questions or need assistance with building a program for you.
These types of pumps can very easily be controller through the ProfiLux and it's available 0-10v L ports (Yellow)
To get started, you need to have either:
- GHL compatible 0-10v cable for your pump.
- GHL LBF-AP module - Connects to L port and provides terminal pinout for connecting bare wires (-/+) 0-10v signal
With this we can set the speed/flow of the pump, throttle it down at night time, increase for thunderstorm and/or decrease for feedings.
In my example, we're going to set the return pump for consistent flow - no wave motion or increase/decrease during normal use.
It's all in the Stream Group setting. In my case, I use Streamgroup 8, I added my RD3 10v interface on L3 to the group, and set it:
Mode: Permanent
Waves: no waves
* Add Pump#: 3
We will set the running power to 60%, 25% during Feed Cycle, and 100% for wild flow during thunderstorms.
Edit pump 3 for:
Minimum: 25
Maximum: 60 (running power)
Night: 40
Thunderstorm: 100
Behavior for feed: minimum
Please let me know if you have questions or need assistance with building a program for you.