Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I figured it out. I set the “constant” mode to blue only. Now all I have to do is hit 6 on the remote to switch to this mode.Also—Is there a way to set a preset that’s only blue channels? Or do I have to go in and adjust all the channels individually when I want to only turn on the blues?
Hey question for you if you remember how far was the light from the sand bedHere’s my par reading using the apogee MQ-510. This is a softie/LPS tank with dimensions of 36x20x20 inches running both blues at 75%, UV at 60% and both whites at 1% mounted at the max height with the included mount. Sometimes I turn off the whites to get the more blue look making corals color pop. All corals are happy. To my surprise they included the remote control, I’ve emailed smatfarm about it and they said because so many ppl complain no remote they give bad rating, they decide to include it again as a “gift.” IMO the remote control is useless, way easier to use the built in control. All in all I love this light.
They were about 27 inches from height of the light to the surface of sand bed. I no longer have this light.Hey question for you if you remember how far was the light from the sand bed
Hi I have two version one is 3 and the other 2 is v1 but cannot get to set master and slave for all 3 together do you know how can I do that thanksOrdered 2 and they sent me a V2 and a V3. I see on the V3 that you can now control the moonlight time. The good thing is with the V3 being the master, it allows the V2 to have a timed moonlight phase vs the all night that it used to have. One had the old mount, the other new. Contacted them and they sent me a newer mount to match. When both have high whites, I notice a more slightly yellow tint on one, not both, of the V3 lights. Still think I might send the V2 back to get 2 V3 just in case Im missing something with the upgrade.
Anyone else notice any other differences in the two versions?
I just have moonlight set at like 10% blue. It's after sunset, right before lights out. I think if you turn "Moonlight" ON in the settings, it runs a blue really low all night. I never tried it, though.Hello guys,
Just got these lights for my Biocube and I may have a few questions.
First I just want to ask, do you guys just run the same channel percentages for sunlight AND moonlight?
All lights need to be the same version othereise they wont sync.Hi I have two version one is 3 and the other 2 is v1 but cannot get to set master and slave for all 3 together do you know how can I do that thanks
Thanks lbrdsoxfan ... do know how to update from version 1.0 to 3.0 for smatfarms light. ThanksAll lights need to be the same version othereise they wont sync.
I’m going to take a better look at it tomorrow and see if I can figure it out. I was kinda rushing today when I was setting it up.I just have moonlight set at like 10% blue. It's after sunset, right before lights out. I think if you turn "Moonlight" ON in the settings, it runs a blue really low all night. I never tried it, though.
You don't. If you bought new exchange them. If you bought used, your sol.Thanks lbrdsoxfan ... do know how to update from version 1.0 to 3.0 for smatfarms light. Thanks
Thanks I bought new but about year ago ... don't know if it be ok to exchangeYou don't. If you bought new exchange them. If you bought used, your sol.
Same on this end with a 65g mix reef as well and two of these lights above tank. Did you get things dialed in? I could not get my lights to change on the timer until I set the clock five hours ahead on the actual time which is annoying.Brand new to the saltwater community. I have 2 of these over my 65 gallon reef tank. what percentages did you finally decide to set your channels? Any info is greatly appreciated!
Once you set your times I believe you have to go into Mode Select and select the mode. I THINK and don’t quote me on it but I think you have to do this every time you re-do your settings.how to start the timer? after putting in the timer in mode setting I went to mode select and select self defined and left it there but it didnt start it?