I recently bought a Mitras Flex Mount for my Mitras. It did not come with any instructions. I was wondering if anyone had a set of instructions or pictures on how it should be assembled.
Thanks for the help
Thanks for the help
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I recently bought a Mitras Flex Mount for my Mitras. It did not come with any instructions. I was wondering if anyone had a set of instructions or pictures on how it should be assembled.
Thanks for the help
Thanks for the reply. I had looked at that post. I am having issue with how the 2 pieces go together and the bolts with the clips on them. I assume the post had pictures at the start of the post but they do not seem to appear now.
Sent you a PM. I can send you some pics tonight and help ya sort it out
Hey there Hollistic.......same issue here. Have 2 GHL Mitras and grabbed a pair of flex mounts and ready to install on my Reefer 350.
Can you send any helpful tips or pics in a PM my way? That or over the forum is fine with me as well.
Thanks much in advance........Craig.
Hey there Hollistic.......same issue here. Have 2 GHL Mitras and grabbed a pair of flex mounts and ready to install on my Reefer 350.
Can you send any helpful tips or pics in a PM my way? That or over the forum is fine with me as well.
Thanks much in advance........Craig.
My memory is that the clip make little sense. It had teeth and sits inside the channel, as I recall you could insert it one of two ways, it basically prevents movement one direction. So if you put it in one way, it will go up easily, but not down. Or it can go down easily, but not up.
So I put it to prevent it from sliding down. Two holes in the sump, mounted such that with 8-12" height above tank it will float above the ground. The top + light screws in, there is a piece to hide the cable.
If you have a reefer 170/250, the glass overhangs the back slightly, so you need the washers as I had. If you have a reefer 425 (thicker glass), then it's flush with those stands and you don't need the washers. I had to buy a bunch of washers to prevent it from hitting the glass.
At 12", you get about 385 PAR at the surface. Depending how much power + spread you need. Mine is currently 8" above, so it's unlikely it will touch the floor.
On the vertical piece, the top has the two holes for the crossbar. I remember putting the clip in backwards and having it to fish it back out because I had it backwards.
Hi Chris,I'm exploring various lighting options for a IM Fusion Lagoon 50 (30" x 24" x 16"). How thick is the mount? What do you think would be the absolute minimum space needed to install the mount? Their description recommends 4" of clearance. I would be looking to install the mount on the side of the stand so the light would be parallel to the length (30"). Also just to verify, the light can be centered at 15" with this mount?
Thank you
Thank you Vinny, that should work then. I'm only going to have 1.25" to 1.5" inches between the tank and the wall.Hi Chris,
The flex mount piece that goes behind the tank is 1.75"L x 0.75"W x 60" H
As long as you have a sold stand wall to mount the flex mount to, you can position it anywhere.