I just bought the other one. This one the shipping its very expensive.
Thank you
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I just bought the other one. This one the shipping its very expensive.
Let us know if this probe is working. When will it be delivered at your place?I just bought the other one. This one the shipping its very expensive.
Thank you
Yess. 2 weeksLet us know if this probe is working. When will it be delivered at your place?
DIY Just to change connector ?Except the Neptune branded probe, all these probes require DIY.
YepDIY Just to change connector ?
That probe will need to be modified as well.I will wait experience @nunomi with AliExpress probe
That probe will need to be modified as well.
Read the thread in it's entirety, a few members tried that also. No it does not work.Is it possible without solder to use this extension from BNC to Mindi Din 4 pin?
The DJS-10 is the correct one and should work. I would cut the connector from the original cable from the old probe and connect this to the probe.I just receive the probe but they send me the DJS-10. I open a complain and they send me the image attached showing the right image for each probe. So, I have 15 days to send back, but before Im going to try it, if it works I keep it.
I bought
bnc connector ( waiting to receive )
4 din cable that im going to cut on the middle and connect to the BNC female connector
Any advices ?
Do I need to calibrate this probe ?The DJS-10 is the correct one and should work. I would cut the connector from the original cable from the old probe and connect this to the probe.
Yes, you'd calibrate the same way you'd calibrate the original probe.Do I need to calibrate this probe ?