Still messing with the tank and such - quick question: the bulkhead is 1/2" thread on the inside and 1" on the outside, right?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What do you mean outside? Those threads are usually intended to just use the nut. The inside is a slip fit.Still messing with the tank and such - quick question: the bulkhead is 1/2" thread on the inside and 1" on the outside, right?
I knew that... I just forgot. Thanks! Except if I want the threads on the inside of the AIO chamber and the slip in the tank... It is half inch though. I printed some test threads and they were perfect.What do you mean outside? Those threads are usually intended to just use the nut. The inside is a slip fit.
It's the same slip both sides... put the tightening nut inside the aio chamber so it looks betterI knew that... I just forgot. Thanks! Except if I want the threads on the inside of the AIO chamber and the slip in the tank... It is half inch though. I printed some test threads and they were perfect.
The inside of the threaded side on mine is threaded, not slip.It's the same slip both sides... put the tightening nut inside the aio chamber so it looks better
42 bucks for a DC pump? How loud is it? I did not go to the specs. What is the GPH?
Its what I had on hand. If I were to recommend one, I'd recommend the zksj version, exact same but has a controller. Zksj also has tiny Wavemakers I might give a try as well.
158gph. Practically silent. I have a bigger version in a 25g AIO, great pump in a tiny footprint.42 bucks for a DC pump? How loud is it? I did not go to the specs. What is the GPH?
Noopsyche k7 mini will always be my nano light recommendation.Might be a bit off topic here but what light is everybody running on this tank or does anyone have any suggestions for a light?
The inside of the threaded side on mine is threaded, not slip.
Did you get a left handed one?The inside of the threaded side on mine is threaded, not slip.
I use 4 and 16 at a kitchen table near an open window. I don't smell it after maybe fifteen minutes when I'm done.How bad is the smell when it's curing with 3 or 4 or 16 I have all 3 but its not warm enough to leave it in my garage
Must be. My 90 is slip as well.Did you get a left handed one?
I think its supposed to beMust be. My 90 is slip as well.
Sorry, I looked at your picture wrong. Same 90 as yours, but the bulkhead is slip on that outlet and thread on the inlet.I think its supposed to be
Mine is as well. Slip on the return pump side to accept the 90. Threaded on the display side. Can't find anything threaded so just leaving it with nothing for flow now except the pump.Sorry, I looked at your picture wrong. Same 90 as yours, but the bulkhead is slip on that outlet and thread on the inlet.
Check out posts 409 703 723. Fluval nozzle kit fits in supplied bulkhead.Mine is as well. Slip on the return pump side to accept the 90. Threaded on the display side. Can't find anything threaded so just leaving it with nothing for flow now except the pump.
That's what I'm saying though, mine is the opposite. Threaded on the return pump side and slip on the tank side.Mine is as well. Slip on the return pump side to accept the 90. Threaded on the display side. Can't find anything threaded so just leaving it with nothing for flow now except the pump.
Did you get a left handed one?
Mine is as well. Slip on the return pump side to accept the 90. Threaded on the display side. Can't find anything threaded so just leaving it with nothing for flow now except the pump.