Unfortunately I don’t have any pictures of the old mix station which consisted of two brute trash cans stacked on a diy 2x4 stand. I figured i would start now with a rebuild.
The Equipment plan: 2-100 gallon norwesco storage tanks (Ntotanks) pickup
Spears three way ball valve (blackhawksupply)
DOS
EB832
PM2
Temp/Salinity probe
FMM
2- optical sensors
2- float valves
Sch. 80 fittings (SupplyHouse)
7 stage rodi
Sediment filter for bin (1/2’’)
DIY inline heater/probes
Solenoids
Rigid Ro tubing (Avast)
Eheim Jager heater
External pump
colored pvc (red) (pvcfittingsonline.com)
Leak sensors
Aquabus cable (usbfirewire)
A few reasons for the change is:
1.I didn’t like the height
2. Hard to clean
3. Overflows
4. Brute smell
5. Didn’t look attractive
6. Under sized in case of emergency
7. Container penetrations
The Equipment plan: 2-100 gallon norwesco storage tanks (Ntotanks) pickup
Spears three way ball valve (blackhawksupply)
DOS
EB832
PM2
Temp/Salinity probe
FMM
2- optical sensors
2- float valves
Sch. 80 fittings (SupplyHouse)
7 stage rodi
Sediment filter for bin (1/2’’)
DIY inline heater/probes
Solenoids
Rigid Ro tubing (Avast)
Eheim Jager heater
External pump
colored pvc (red) (pvcfittingsonline.com)
Leak sensors
Aquabus cable (usbfirewire)
A few reasons for the change is:
1.I didn’t like the height
2. Hard to clean
3. Overflows
4. Brute smell
5. Didn’t look attractive
6. Under sized in case of emergency
7. Container penetrations