Does anyone have a 3d file to print something like this Nori feeder
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
May cost as much to make it as to just buy the real thing. [emoji3]
You're right, thats probably the more important question. I read somewhere that it is very similar to bio balls and may act as a form of carbon dosing if it does break down. It might be worth asking Randy HF what he thinks might happen. I might have a search to see if its already been asked or not and if not I might make a thread in the chemistry sectionThe larger question on PLA should be what would actually happen if trace amounts of lactic acid leached into your tank?
I have several files I worked with Saints on for his sump (adding sock holders, and replacing red parts with blue parts). I did some aesthetics for Bubble Magus skimmers.
I don't think so haha. These are like $25 on amazon. It would only cost maybe a dollar to print (in plastic and electricity) if you don't include your time to design it, but even then its a pretty basic design anyway so shouldnt take long to draw it.May cost as much to make it as to just buy the real thing. [emoji3]
I’ve made and sold a couple hundred of toggle boxes for Apex. You know, control your outputs and programs with a button instead of needing to take out your phone.
Does that plug into where the breakout box would go?
You're right, thats probably the more important question. I read somewhere that it is very similar to bio balls and may act as a form of carbon dosing if it does break down. It might be worth asking Randy HF what he thinks might happen. I might have a search to see if its already been asked or not and if not I might make a thread in the chemistry section
I don't think so haha. These are like $25 on amazon. It would only cost maybe a dollar to print (in plastic and electricity) if you don't include your time to design it, but even then its a pretty basic design anyway so shouldnt take long to draw it.
Haha! Not atm or I'd be working on my ReefPi build. If i find some time next weekend I might as it really would only take 10 min if you are semi decent at fusion 360. Having said that I wouldnt model it to have a magnet in it, I would model it to just clip onto my current TLF magnet clip which would make it easier to design tooCool then draw it up for the fella I am sure you have the free time. [emoji3]
Awesome, glad you found oneIt's the fully locked in place in the second pick that's why it looks off
The larger question on PLA should be what would actually happen if trace amounts of lactic acid leached into your tank?
I have several files I worked with Saints on for his sump (adding sock holders, and replacing red parts with blue parts). I did some aesthetics for Bubble Magus skimmers.
I have been trying to get the STLs for the curve 7 since he first posted the pics of his build!
What timeframe was that over? I'm glad that someone actually has some experience to back that claim up though as I have been looking for over a year and every time someone says PLA is bad it turns out they just read it in an article (which I read too).
I found the first feeder ring was a little bit soft, but I couldn't put that down to being in the tank because as I said it was quite under extruded and had thin walls so it was pretty squishy to begin with. The nitrate reactor hasn't had any change to it's outer walls since I put it in over 6 months ago.
The larger question on PLA should be what would actually happen if trace amounts of lactic acid leached into your tank?