- Joined
- May 16, 2017
- Messages
- 1,178
- Reaction score
- 1,051
Hey there,
Looking at you guy's products and I'm thinking of getting the Twist-in 100 GPD system. The area in my apartment that I can mount this on is just about 12 inches, so this works well for me.
One question: if my area has a good amount of chloramine, I believe I will need the chloramine add on? Can I mount it below the main Twist-in system?
FYI, my water statistics:
From the Tap (rough measurements from a neighbor)
Nitrate: about 10ppm
Hardness GH PPM: ~100
chlorine: ~0.8ppm
pH: ~8.0
TDS: like 210
From our local water authority
Hardness: 8 grains/gal or 130 mg/L
pH: 7.6
Chloramine Residual: 2.7 ppm
Fluoride: 0.7 ppm
Sodium: 22 ppm
Nickel: 0.5 ppb
Calcium: 39 mg/L
Chloride: 35 mg/L
Magnesium: 7 mg/L
Sulfate: 40 mg/L
Thanks!
Looking at you guy's products and I'm thinking of getting the Twist-in 100 GPD system. The area in my apartment that I can mount this on is just about 12 inches, so this works well for me.
One question: if my area has a good amount of chloramine, I believe I will need the chloramine add on? Can I mount it below the main Twist-in system?
FYI, my water statistics:
From the Tap (rough measurements from a neighbor)
Nitrate: about 10ppm
Hardness GH PPM: ~100
chlorine: ~0.8ppm
pH: ~8.0
TDS: like 210
From our local water authority
Hardness: 8 grains/gal or 130 mg/L
pH: 7.6
Chloramine Residual: 2.7 ppm
Fluoride: 0.7 ppm
Sodium: 22 ppm
Nickel: 0.5 ppb
Calcium: 39 mg/L
Chloride: 35 mg/L
Magnesium: 7 mg/L
Sulfate: 40 mg/L
Water Quality Reports - Water & Utilities
Arlington's water meets or surpasses all state and federal drinking water standards. Learn more information in our water quality reports.
water.arlingtonva.us
Thanks!