Help! Phosguard is making my water milky white!

AydenLincoln

Pufferfish lover!
View Badges
Joined
Mar 27, 2022
Messages
5,458
Reaction score
7,975
Location
Easton
Rating - 100%
1   0   0
I rinsed my phosguard and let it soak and then added it to my tank and noticed my water turn milky white. I immediately removed it and continued to rinse it and let it soak in freshwater. It’s not getting any better. Is this normal? Is it like carbon where the water will run clear? Do I have to keep rinsing it until the water runs clear? Should I let it soak in freshwater? Either way it seems to be really dusty and I assume that isn’t good.
 

Miami Reef

10K Club Member
View Badges
Joined
Sep 8, 2017
Messages
12,258
Reaction score
23,094
Location
Miami Beach
Rating - 0%
0   0   0
You probably didn’t rinse it well enough. The white cloud is probably aluminum oxide. I don’t like using aluminum-based phosphate removers because it can release some aluminum into the tank.

I don’t think anything catastrophic will happen from the aluminum cloud. Perhaps it will get skimmed out or settle out somewhere.
 

Reef.

2500 Club Member
View Badges
Joined
Mar 12, 2019
Messages
4,845
Reaction score
3,621
Rating - 0%
0   0   0
I rinsed my phosguard and let it soak and then added it to my tank and noticed my water turn milky white. I immediately removed it and continued to rinse it and let it soak in freshwater. It’s not getting any better. Is this normal? Is it like carbon where the water will run clear? Do I have to keep rinsing it until the water runs clear? Should I let it soak in freshwater? Either way it seems to be really dusty and I assume that isn’t good.
Normal, thats why my tub is still nearly full as I stopped using it.

Just is too much hassle to use…rowa is a better alternative, can’t believe I’m saying this as I don’t particularly like rowa either but between the two, rowa is easier to work with, still needs rinsing but not as much as phosguard.
 

gbroadbridge

2500 Club Member
View Badges
Joined
Mar 25, 2021
Messages
4,585
Reaction score
4,881
Location
Sydney, Australia
Rating - 0%
0   0   0
I rinsed my phosguard and let it soak and then added it to my tank and noticed my water turn milky white. I immediately removed it and continued to rinse it and let it soak in freshwater. It’s not getting any better. Is this normal? Is it like carbon where the water will run clear? Do I have to keep rinsing it until the water runs clear? Should I let it soak in freshwater? Either way it seems to be really dusty and I assume that isn’t good.
I've never seen that problem, but I rinse under the tap until the water runs clear.
 

X-37B

Fight The Good Fight
View Badges
Joined
Sep 10, 2018
Messages
9,700
Reaction score
16,861
Location
The Outer Limits
Rating - 0%
0   0   0
I have used it for 7+ and its in my new system now. It has never made the water milky
I prefer it to gfo.
I put it in a bag and run rodi through it until the water is clear.
I then put it in a reactor.
I have also used it in a bag sitting in the sump on small nanos, 20g, with no issues.
Also it has never shown up on any ipc test I have done.
I do notice that some of the containers have more powder than others.
Rinse it well. It does not need to soak.
 
OP
OP
AydenLincoln

AydenLincoln

Pufferfish lover!
View Badges
Joined
Mar 27, 2022
Messages
5,458
Reaction score
7,975
Location
Easton
Rating - 100%
1   0   0
No matter how much rinsing or letting it sit I do it’s still white! And when I put it in my tank I removed it immediately because my tank got so cloudy almost like what happens when a really bad bacterial bloom happens.
IMG_7891.jpeg
 

Reef.

2500 Club Member
View Badges
Joined
Mar 12, 2019
Messages
4,845
Reaction score
3,621
Rating - 0%
0   0   0
I have used it for 7+ and its in my new system now. It has never made the water milky
I prefer it to gfo.
I put it in a bag and run rodi through it until the water is clear.
I then put it in a reactor.
I have also used it in a bag sitting in the sump on small nanos, 20g, with no issues.
Also it has never shown up on any ipc test I have done.
I do notice that some of the containers have more powder than others.
Rinse it well. It does not need to soak.
Maybe some batches are worse than others, as I have previously used it but can’t remember it making the water as cloudy as it did this time, and I rinsed for ages.
 
OP
OP
AydenLincoln

AydenLincoln

Pufferfish lover!
View Badges
Joined
Mar 27, 2022
Messages
5,458
Reaction score
7,975
Location
Easton
Rating - 100%
1   0   0
Maybe some batches are worse than others, as I have previously used it but can’t remember it makes the water as cloudy as it did this time, and I rinsed for ages.
This is making me feel better because I can’t get it clear and I’m not risking adding it to my tank.
 

Reef.

2500 Club Member
View Badges
Joined
Mar 12, 2019
Messages
4,845
Reaction score
3,621
Rating - 0%
0   0   0
This is making me feel better because I can’t get it clear and I’m not risking adding it to my tank.
Has to be the reason, as I am ocd about rinsing as I didn’t want to add any aluminium from it, I also soaked it.

I have given up on both rowa and phosguard, moved to Tropic Marin bacto balance, much easier and not adding any unwanted elements to the tank and also not removing elements from the water with rowa or phosguard.
 

X-37B

Fight The Good Fight
View Badges
Joined
Sep 10, 2018
Messages
9,700
Reaction score
16,861
Location
The Outer Limits
Rating - 0%
0   0   0
This is making me feel better because I can’t get it clear and I’m not risking adding it to my tank.
Only thing to do is rinse until its clear. It sometimes takes a few gallons for it to come clean.
Gfo is the same if not rinsed properly it will leave ferric oxide dust everywhere.
 

LPS Bum

Well-Known Member
View Badges
Joined
Apr 22, 2021
Messages
678
Reaction score
965
Location
Colorado
Rating - 0%
0   0   0
I use it regularly and I’ve never seen that happen. I just rinse it under running tap water for about 30 sec. I do use a lot less than you do though (that’s a huge bag of Phosguard in the pic). I use about 1/4 cup in my 165 gal reef and replace it every 2 weeks.

Sounds to me like you got a very chalky batch. Probably best to discard it.
 
OP
OP
AydenLincoln

AydenLincoln

Pufferfish lover!
View Badges
Joined
Mar 27, 2022
Messages
5,458
Reaction score
7,975
Location
Easton
Rating - 100%
1   0   0
Only thing to do is rinse until its clear. It sometimes takes a few gallons for it to come clean.
Gfo is the same if not rinsed properly it will leave ferric oxide dust everywhere.
I have this happen with GFO no matter how much I rinse it but also I guess it’s normal and supposed to happen with GFO.
 
OP
OP
AydenLincoln

AydenLincoln

Pufferfish lover!
View Badges
Joined
Mar 27, 2022
Messages
5,458
Reaction score
7,975
Location
Easton
Rating - 100%
1   0   0
I use it regularly and I’ve never seen that happen. I just rinse it under running tap water for about 30 sec. I do use a lot less than you do though (that’s a huge bag of Phosguard in the pic). I use about 1/4 cup in my 165 gal reef and replace it every 2 weeks.

Sounds to me like you got a very chalky batch. Probably best to discard it.
That’s actually the bag for a 60 gallon tank and yes that’s what I’m going to do.
 

gbroadbridge

2500 Club Member
View Badges
Joined
Mar 25, 2021
Messages
4,585
Reaction score
4,881
Location
Sydney, Australia
Rating - 0%
0   0   0
I have this happen with GFO no matter how much I rinse it but also I guess it’s normal and supposed to happen with GFO.
Well, I don't really bother rinsing GFO, you're rinsing away particles of GFO that you paid for.
It just settles in the tank and adsorbs phosphate, or it gets filtered out mechanically.
Any GFO dust is gone within hours.

Aquaforest advise against rising their GFO for that reason :)

The only reason why I rinse Phosguard is because the instructions tell me to, and I don't want Aluminium in the tank which I then have to remove using GFO
 
OP
OP
AydenLincoln

AydenLincoln

Pufferfish lover!
View Badges
Joined
Mar 27, 2022
Messages
5,458
Reaction score
7,975
Location
Easton
Rating - 100%
1   0   0
Well, I don't really bother rinsing GFO, you're rinsing away particles of GFO that you paid for.
It just settles in the tank and adsorbs phosphate, or it gets filtered out mechanically.
Any GFO dust is gone within hours.

Aquaforest advise against rising their GFO for that reason :)

The only reason why I rinse Phosguard is because the instructions tell me to, and I don't want Aluminium in the tank which I then have to remove using GFO
Actually my GFO tells me to rinse it but also because it’s in chemi-pure elite which I use. And I have found most if not all various Seachem products state to rinse them prior to use.
 

Randy Holmes-Farley

Reef Chemist
View Badges
Joined
Sep 5, 2014
Messages
72,235
Reaction score
69,908
Location
Massachusetts, United States
Rating - 0%
0   0   0
I never saw such an issue when experimenting with Phosguard, but I definitely would not use it as I would not want all that aluminum oxide dust to remain in the water, potentially pushing up aluminum with no real way to stop it.
 

TOP 10 Trending Threads

WHICH OF THESE CREEPY REEF CRITTERS IS MOST LIKELY TO GIVE YOU NIGHTMARES? (PICTURED IN THE THREAD)

  • The Bobbit Worm

    Votes: 47 66.2%
  • The Goblin Shark

    Votes: 4 5.6%
  • The Sea Wolf

    Votes: 0 0.0%
  • Giant Spider Crabs

    Votes: 1 1.4%
  • The Stargazer Fish

    Votes: 5 7.0%
  • The Giant Isopod

    Votes: 9 12.7%
  • The Giant Squid

    Votes: 1 1.4%
  • Other (Please explain!)

    Votes: 4 5.6%
Back
Top