Help with my red sea reef matt

[Spartandowns]

I am in need of some help I have a red sea reefer 200 g2+ and I am try to get my skimmer and reef Matt to fit but they just don't seem to want to go there website says it is just plug and play for the g2+ I really don't want to mod my sump an help wold be great

 

[blaxsun]

If you go to Red Sea's website, choose accessories and select the ReefMat. If you scroll down to the bottom they have a link for each Red Sea tank model and the recommended configuration options.

 

[Spartandowns]

I saw that but they don't have an option for the g2 + models the stuff on the web site says to cut out all the baffles but but if you scroll down just a little bit more it say it's plug and play no moving requirements

 

[Reef By Steele]

I took the baffles out of my 3XL900 as I didn’t want any dead or stagnant spots. It
Will be a pain if you decide to go back to socks, but probably the best way to have room for both.

 

[SimbaAnto]

With G2 + models you can remove the sock chamber and refugium baffle. This should give you space to add skimmer and reefmat.

 

[Spartandowns]

It's is the reefer 200 it's the 43 gallon with the 11 gallon sump

 

[FernBluffReef]

I just installed the same in my RS170 G2+ which has a slightly smaller sump than yours. Just about to get wet. Photo of install can be found on my thread. Tight fit but it does fit if oriented right.

 

[slingfox]

What model Reefmat?

 

[brclark82]

“To install a ReefMat, remove the filter bag tray and slide out the removable divider wall”

Have you done that part?