Zoacoral
Valuable Member
I have a 105 gallon tank, It has 2- 1 inch drains, and 2- 3/4 inch drains. I am wondering what return pump I should use. I will feed my refguim or an algae turf scrubber with the pump as well. I have a 40 gallon sump.
help with return
- Thread starter Zoacoral
- Start date
- Tagged users None
revhtree
Owner Administrator
Staff member
Super Moderator
Reef Squad
Partner Member 2024
Excellence Award
RGB
Photo of the Month
Article Contributor
R2R TV Featured
Hospitality Award
Article Administrator
Black Friday Sponsor
Partner Sponsor 2023
Industry Professional
My Aquarium Showcase
- Joined
- May 8, 2006
- Messages
- 48,287
- Reaction score
- 90,895
You want to go internal or external?
Eggs
Well-Known Member
I'm not sure if it would be enough to feed the ats (just read the diy on this site, gph would depend on size of ats). Anyway, I think a Mag 7 or something around that gph would work.
I use a Mag 7 on a 150g with two 1" drains, and it runs wide open - thinking about going to a Mag 9.5. I also have a 180g and run both return pumps around 5x turnover. Mag 12 throttled back on the 180g.
I use a Mag 7 on a 150g with two 1" drains, and it runs wide open - thinking about going to a Mag 9.5. I also have a 180g and run both return pumps around 5x turnover. Mag 12 throttled back on the 180g.
OP
OP
Zoacoral
Valuable Member
I have a mag 9.5, but was looking for something a little more efficient.. I ran across a Water blaster 3000 circulation pump, and it uses a 1/3rd of electricity that the mag 9 does. But its only 750 gph..
Eggs
Well-Known Member
I agree with the power efficiency regarding the Mags. I've debated often about switching to something else. The reliability that I've experienced with them is the main reason I haven't switched.
Similar threads
