Opinions on first attempt at aquascaping for what will be my 150 gal
- Thread starter RobertP1969
- Start date
- Tagged users None
1000rrstunna
Active Member
Looks pretty rad for your first time. Consider drilling some holes for frag plug placement and if they are just stacked add some epoxy at minimum. I like water weld. It can be had at homedepot or you can drill and add acrylic rods
Justfebreezeit
Valuable Member
Awesome shape and an i really like how one side has a cave vs pass through.
Hard to tell from the pic but just make sure you have room for coral to grow towards the glass without affecting an algae scraper
Hard to tell from the pic but just make sure you have room for coral to grow towards the glass without affecting an algae scraper
RobertP1969
Community Member
It is different kinds of that Marco's rock. Shelf,hybrid,and reef saver I think
RobertP1969
Community Member
Thanks everyone. I'm going to leave it there and keep going back to it to make sure
I want to keep it that way before I glue it all together
I want to keep it that way before I glue it all together
Gumbies R Us
Certified Noob
Really great looking design!
RobertP1969
Community Member
What does everyone use to "glue" your aquascape together?
RedoubtReef
Valuable Member
JB watereld. I sometimes use it with acrylic rod drilled into the rocks as well.
Really cool look!!
Love the bridge and the little alcoves underneath the main structures!
Looks awesome! I do agree though about holes for frag plugs.
Just a mason bit roughly the size of plugs?
TOMACONDA
New Member
I used super glue then Marco mortar
Attachments
Yes, masonry bits work just fine. Frag plugs are generally 3/8", so Maybe just slightly bigger, but not 7/16", that would be too big.
3/8” with a little wiggle at the end to widen it ever so slightly
RobertP1969
Community Member
I like that rock work
Looks good to me.
Keep in mind (if you haven't already) that some flat "base rock" should be used under the structure so it doesn't settle and/or have the bottom pieces covered by sand.
Keep in mind (if you haven't already) that some flat "base rock" should be used under the structure so it doesn't settle and/or have the bottom pieces covered by sand.
Similar threads
