PM1 with Breakout box NOT sending alerts or emails, not login the errors either in apex alerts
The functions of the breakout box switches are all working. The six switches are overflow detectors for 3 separate tanks. I like redundancy, 2 set at different levels in case one fails, the other should work. ( In Theory )
They all 6 shut the return pumps off and when you release the switch they turn them back on. The fusion app of course is a delay but you do see the slider go from closed to open.
The problem is there is no fusion alert, no email and no text.
Other alerts work, like salt, PH, temp, trident results, flow meter alerts. Just the newly added PM1 and breakout box is not sending alerts or text/email messages.
Here is my code for 6 switched on PM1_13
The Switches are renamed to to HW13_1-6 HW stands for High Water
Set OFF
If HW13_1 OPEN Then ON
If HW13_2 OPEN Then ON
If HW13_3 OPEN Then ON
If HW13_4 OPEN Then ON
If HW13_5 OPEN Then ON
If HW13_6 OPEN Then ON
Then I added these 2 last lines of code to see if the main EB832 running the pumps when off would send an alert. But that didn't work either.
Set OFF
If HW13_1 OPEN Then ON
If HW13_2 OPEN Then ON
If HW13_3 OPEN Then ON
If HW13_4 OPEN Then ON
If HW13_5 OPEN Then ON
If HW13_6 OPEN Then ON
If Output AllTanks = OFF Then ON
If Output ReefOnly = OFF Then ON
Thanks in advance for any advice and help.
The functions of the breakout box switches are all working. The six switches are overflow detectors for 3 separate tanks. I like redundancy, 2 set at different levels in case one fails, the other should work. ( In Theory )
They all 6 shut the return pumps off and when you release the switch they turn them back on. The fusion app of course is a delay but you do see the slider go from closed to open.
The problem is there is no fusion alert, no email and no text.
Other alerts work, like salt, PH, temp, trident results, flow meter alerts. Just the newly added PM1 and breakout box is not sending alerts or text/email messages.
Here is my code for 6 switched on PM1_13
The Switches are renamed to to HW13_1-6 HW stands for High Water
Set OFF
If HW13_1 OPEN Then ON
If HW13_2 OPEN Then ON
If HW13_3 OPEN Then ON
If HW13_4 OPEN Then ON
If HW13_5 OPEN Then ON
If HW13_6 OPEN Then ON
Then I added these 2 last lines of code to see if the main EB832 running the pumps when off would send an alert. But that didn't work either.
Set OFF
If HW13_1 OPEN Then ON
If HW13_2 OPEN Then ON
If HW13_3 OPEN Then ON
If HW13_4 OPEN Then ON
If HW13_5 OPEN Then ON
If HW13_6 OPEN Then ON
If Output AllTanks = OFF Then ON
If Output ReefOnly = OFF Then ON
Thanks in advance for any advice and help.