Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That I don't know.Yeah, I assume you would use the fleece a little faster - as it would catch more material out of the water.
But your tank water would be clearer - and so would your sump.
I just don't know if there is any other manufacturer's fleece roller that would fit on the ReefMat - or are they pretty standard size...?
I'm more than aware of that...Metric is the standard measurement outside of the US...
There's enough "wiggle" room to fit a 7" roll - just barely. It may get a little "scrunched" right on the spool itself (which is about 0.25" narrower than the width of the outer red roll holders). The only thing that I can see being an issue is that the diameter of the fleece roll seems much larger than the ReefMat fleece rolls (and the roll itself may end up being too wide to fit the ReefMat spools).The Red Sea ReefMat 1200 has a 6.7" wide roll...
There is a 7" wide roll that Klir makes that is 50 microns...
I wonder if that extra .3" would make a difference - or if it would fit the Red Sea 1200...
Is the Clarisea a good fit on the bubble magus? Struggling to get new rolls for my bubble Magus right nowI'm more than aware of that...
End game is that if the op wants another fleece option, it's going to be custom cut width and not plug and play due to the non standard setup that red sea chose to implement.
I use a few different bubble magus filter rollers (small) I can use any media that measures 4" across (klir, aquamaxx, clarisea) are all compatible and tested. I use coolant paper instead, it's a reasonably cheaper option for me and I'm willing to do the extra footwork needed to make it work.
Red sea roller mat users can't do the same as the width of the 500 and 1200 machines aren't standardized to any of the other branded rollers when it comes to media width.
Is the Clarisea a good fit on the bubble magus? I’m struggling to find bubble magus rolls right now so if this is an option to use would be greatI'm more than aware of that...
End game is that if the op wants another fleece option, it's going to be custom cut width and not plug and play due to the non standard setup that red sea chose to implement.
I use a few different bubble magus filter rollers (small) I can use any media that measures 4" across (klir, aquamaxx, clarisea) are all compatible and tested. I use coolant paper instead, it's a reasonably cheaper option for me and I'm willing to do the extra footwork needed to make it work.
Red sea roller mat users can't do the same as the width of the 500 and 1200 machines aren't standardized to any of the other branded rollers when it comes to media width.
Yeah the Clarisea will go in long as you have the 'small' sized filter roller, same measurement across. Aquamaxx brand fleece is a drop in option if the sizes are the medium/large fleece.Is the Clarisea a good fit on the bubble magus? I’m struggling to find bubble magus rolls right now so if this is an option to use would be great
Did you get this to work? I have a Reefmat 1200 and an ozone generator, and long story short I found out you really need a 50 micron filter to make use of the ozone generator from an orp standpoint.There's enough "wiggle" room to fit a 7" roll - just barely. It may get a little "scrunched" right on the spool itself (which is about 0.25" narrower than the width of the outer red roll holders). The only thing that I can see being an issue is that the diameter of the fleece roll seems much larger than the ReefMat fleece rolls (and the roll itself may end up being too wide to fit the ReefMat spools).
One of my suppliers carries these so I think I'll have to try it out.
Please do tell us more...Did you get this to work? I have a Reefmat 1200 and an ozone generator, and long story short I found out you really need a 50 micron filter to make use of the ozone generator from an orp standpoint.
I ended up going the "recycle" route as a slight deviation instead. So far I'm up to two recycles with no hits to nutrient levels.Did you get this to work? I have a Reefmat 1200 and an ozone generator, and long story short I found out you really need a 50 micron filter to make use of the ozone generator from an orp standpoint.
Wondering if you ever tried the 7" roll out?There's enough "wiggle" room to fit a 7" roll - just barely. It may get a little "scrunched" right on the spool itself (which is about 0.25" narrower than the width of the outer red roll holders). The only thing that I can see being an issue is that the diameter of the fleece roll seems much larger than the ReefMat fleece rolls (and the roll itself may end up being too wide to fit the ReefMat spools).
One of my suppliers carries these so I think I'll have to try it out.