Have you had any problems with spectrapure UHE unit? mine isn't doing its flush nor is the booster pump turning off after the water level is reached.. spectrapur has already sent me out a new controller for the booster pump but having the same issue :/ could you take a pic of how urs is wired? I know some of these plugs could go to the wrong area and im wondering if they wired mine backwards or something
Surprisingly - it's probably due to the valves on top of the solenoids. Both spectrapures I purchased shipped with the valves in the wrong position. The pic below is when they are wrong!
From my emails with them:
I am having troubles with the UHE 100 - after both float switches are in the open position (floating - container is full) - the unit continues to make water. We tested this by plugging the transformer directly into the solenoids - the left one made no indication. The right one did go into flush mode when power was applied.
Question. Regarding this issue with the 1st solenoid not working - should the first valve be pointed down like the 2nd valve? This close up pic (attached) is taken from behind the unit.
Yes. That is why its not working.
Indeed - the system shuts off now as expected with the valve turned. Just so you know - I followed the instructions implicitly. I did not touch this valve when I was installing the system. It may have come from Spectrapure like this.