I saw a thread on reef builders that the new reefbot lab has an LED-off option, can we upgrade our devices to have this feature available?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hello! The upgrade kit contains the following:Sorry to jump on this old tread
What comes with the upgrade kit
Thanks
Hello! The upgrade kit contains the following:
1- Complete testing chamber with a new photometer inside
2- Stirrer motor head containing stronger magnets with thicker size
3- LED lights switch
You can find the kit here:
Color Sensor, Stirrer, & LED switch Upgrade
https://www.reefkinetics.com/product/color-sensor-stirrer-led-switch-upgrade/
Our dear friend Deven has uploaded a video for the upgrade kit installation tutorial:
It will contain the same hardware components as the newest releases, yes.So that is eveything to bring unit to Batch 6
Hello, all hoses are of the same length. The inlet tube contains a filter. You can check the full manual here:Just got a used unit delivered
Which hose goes to the tank connection
My guess would be the long one
Hello Frank, the new photometer is better suited for the device's purpose. However, please note that there is nothing wrong with the old sensor. The new sensor has some improvements that make it better. It can now interpolate color shades between two points more accurately. Additionally, the new sensor is positioned at the bottom and center of the chamber, which results in higher accuracy for tests that require low sample volumes, such as tests performed on only 1 or 2 ml of sample water. The wires of the sensor now are better insulated inside the chamber and the chamber is now elevated and shorter in length(same volume), which allows the new stirrer motorhead, with thicker magnets, to not hit the bottom of the chamber. Furthermore, the new stirrer motor head is closer to the vials and will stir some of the most viscous reagents more effectively.@Reef Kinetics can't remember if I asked before, but what is the difference between the old color sensor and the version in the V6s? I'm sure it is a better and more accurate sensor, but are there parts numbers for the two so we could go read specs/data sheets on them? Just curious to see to see if the money/time justifies the upgrade.
Hello, is the issue still ongoing? What is the current status of the LED lights? Are they blinking blue or steady blue?HI
Thanks for reply on the tube length
Another issue is the machine found and connected to BT it says it is connected to my network but when I go to do a test it tells me it is not online
Hi there! Blinking blue light indicates that it has lost connectivity or is not connected. To resolve this issue, please restart your device. Once it starts blinking blue again, open the app and go to your device settings. From there, select "Edit WiFi Connection" and reconnect your device to your WiFi network. Make sure that the name and password of your WiFi network do not contain any special characters. If the issue persists, please share your email address with us and we will have one of our agents contact you to assist you further.Blinking Tried that no go Never get steady blue
All that has been done Someone did contact me by emailHi there! Blinking blue light indicates that it has lost connectivity or is not connected. To resolve this issue, please restart your device. Once it starts blinking blue again, open the app and go to your device settings. From there, select "Edit WiFi Connection" and reconnect your device to your WiFi network. Make sure that the name and password of your WiFi network do not contain any special characters. If the issue persists, please share your email address with us and we will have one of our agents contact you to assist you further.
Regards,