235gal tank with 180gal sump - 2/2 update

OP
OP
danreef55

danreef55

Valuable Member
View Badges
Joined
Dec 9, 2023
Messages
1,669
Reaction score
5,020
Location
New York
Rating - 0%
0   0   0
CO2 Scrubber: what brand is that? Will you do recirculating? Otherwise, you’ll be replacing media every 2 weeks!

This what I have

I will get this if needed. First, I will try to devise a fresh air feed
 

bakbay

Valuable Member
View Badges
Joined
Sep 1, 2022
Messages
2,449
Reaction score
3,485
Location
Orange County
Rating - 0%
0   0   0
Got it - I’ve been using an IceCap CO2 Scrubber with good result. My pH is pegged between 8.2 to 8.5. The BRS Large unit is way bigger than the IceCap so I might consider this in the future.

Assumed there’s a tube that goes all the way to the bottom of the unit, similar to the Icecap? I couldn’t find that info readily available.

Media: I got mine in bulk on Amazon vs directly from JorVet since it’s the same price +shipping.
 

bakbay

Valuable Member
View Badges
Joined
Sep 1, 2022
Messages
2,449
Reaction score
3,485
Location
Orange County
Rating - 0%
0   0   0
Bulk Reef Supply

7.5 lbs Bulk Color Changing CO2 Absorbent Media BRS​

Jorvet: $3.45/lbs
BRS: $5.73/lbs

That’s rough math for me ordering from Amazon vs BRS, shipped. I was wondering if I can get it cheaper but looks like Jorvet is still the cheapest.
 
OP
OP
danreef55

danreef55

Valuable Member
View Badges
Joined
Dec 9, 2023
Messages
1,669
Reaction score
5,020
Location
New York
Rating - 0%
0   0   0
Doing a leak test of the sump. No leaks so I am happy. Making more RODI once I have enough I will be leak testing the plumbing from the basement to the display.
 
OP
OP
danreef55

danreef55

Valuable Member
View Badges
Joined
Dec 9, 2023
Messages
1,669
Reaction score
5,020
Location
New York
Rating - 0%
0   0   0
Any suggestions for live rock? I only need 20LBS of base rock which will be added to the sump. Tampa Bay is out of stock. Saltwater Aquarium is $20/Lb (including freight) Tank Stop $25/Lb
 
OP
OP
danreef55

danreef55

Valuable Member
View Badges
Joined
Dec 9, 2023
Messages
1,669
Reaction score
5,020
Location
New York
Rating - 0%
0   0   0
Might want to check back with Tampa Bay on Feb. 1st to see if they have some live rocks for sale.

Looks like you are going to be filling it up soon! Exciting!
Will definitely check them out again. Thanks for the tip. I have to pump about 150 gals into the display and then make up the balance of the water so probably two days before I will officially be WET:)
 

JGT

5000 Club Member
View Badges
Joined
Jul 6, 2020
Messages
5,870
Reaction score
6,819
Location
Northeast
Rating - 0%
0   0   0
Any suggestions for live rock? I only need 20LBS of base rock which will be added to the sump. Tampa Bay is out of stock. Saltwater Aquarium is $20/Lb (including freight) Tank Stop $25/Lb
KP Aquatics. I bought 300+ premium when I started my tank. Beautiful stuff. Shipped air freight in water. No die off.
They also have base rock $7 pound plus air freight shipping or 20 pounds shipped overnight UPS.
Philippe is great to deal with.
 
OP
OP
danreef55

danreef55

Valuable Member
View Badges
Joined
Dec 9, 2023
Messages
1,669
Reaction score
5,020
Location
New York
Rating - 0%
0   0   0
KP Aquatics. I bought 300+ premium when I started my tank. Beautiful stuff. Shipped air freight in water. No die off.
They also have base rock $7 pound plus air freight shipping or 20 pounds shipped overnight UPS.
Philippe is great to deal with.
Thank you I checked it out and it is definitely a viable option!
 
OP
OP
danreef55

danreef55

Valuable Member
View Badges
Joined
Dec 9, 2023
Messages
1,669
Reaction score
5,020
Location
New York
Rating - 0%
0   0   0
The tank is 1/3 full and looking good. I did have a slow drip on one of the return line bulkheads. It was hand tightened but Joe from GC's suggestion I turned it 1/8" and problem solved. Generating more rodi, it will take approximately 12 hours to make what I still need. Getting impatient now that I am so close.

The Hydros collective is almost complete but waiting on a 25' command bus power only cable to complete under the display controls and XP8 for power The XS is being used for Sense ports (tank temp & leak detector)
 
OP
OP
danreef55

danreef55

Valuable Member
View Badges
Joined
Dec 9, 2023
Messages
1,669
Reaction score
5,020
Location
New York
Rating - 0%
0   0   0
The tank is up and running. Well, it isn't running right now because the Red Sea eductors are blowing a large amount of bubbles. I am going to build my own exhausts but need some plumbing parts. The lights are mounted in the canopy. It looks like I will have to add T5s. Borrowing a par meter from LFS and I will check current readings. The 25' Hydros cable came tonight and I will finish building the collective tomorrow. It's going to be a busy few days
 

bakbay

Valuable Member
View Badges
Joined
Sep 1, 2022
Messages
2,449
Reaction score
3,485
Location
Orange County
Rating - 0%
0   0   0
The tank is up and running. Well, it isn't running right now because the Red Sea eductors are blowing a large amount of bubbles. I am going to build my own exhausts but need some plumbing parts. The lights are mounted in the canopy. It looks like I will have to add T5s. Borrowing a par meter from LFS and I will check current readings. The 25' Hydros cable came tonight and I will finish building the collective tomorrow. It's going to be a busy few days
Huge progress, Dan! You’re hauling *** going solo. Can’t wait to see the full system running - very exciting!
 
OP
OP
danreef55

danreef55

Valuable Member
View Badges
Joined
Dec 9, 2023
Messages
1,669
Reaction score
5,020
Location
New York
Rating - 0%
0   0   0
Ran the Hydros command bus data only cable from the stand to the basement. I have found the interface to be fairly easy to get the hang of but I am running into some issues. @Connor At CoralVue I have the data only cable attach to an XP8 in the stand and to an X3 in the basement. They both have power.

I am trying to link an XS under the stand and I was able to get it recognized. Now I am getting a not responding error. I am connected to a 2.4ghz network.

Also having a problem linking a 4 outlet wifi in the stand. I have tried to set it up 4 times following the app instructions to no avail. Can you shed any light on this?
 

bakbay

Valuable Member
View Badges
Joined
Sep 1, 2022
Messages
2,449
Reaction score
3,485
Location
Orange County
Rating - 0%
0   0   0
Ran the Hydros command bus data only cable from the stand to the basement. I have found the interface to be fairly easy to get the hang of but I am running into some issues. @Connor At CoralVue I have the data only cable attach to an XP8 in the stand and to an X3 in the basement. They both have power.

I am trying to link an XS under the stand and I was able to get it recognized. Now I am getting a not responding error. I am connected to a 2.4ghz network.

Also having a problem linking a 4 outlet wifi in the stand. I have tried to set it up 4 times following the app instructions to no avail. Can you shed any light on this?
Took me awhile to get the collective running but somehow accidentally got it to work - no clue why. Have you tried to pair them up next to each other, one at a time, and then move them?
 

TOP 10 Trending Threads

HOW OFTEN DO YOU VISIT YOUR LOCAL FISH STORE?

  • Often - Weekly.

    Votes: 45 36.9%
  • Occasionally - Monthly.

    Votes: 37 30.3%
  • Rarely - Every few months.

    Votes: 25 20.5%
  • Only when I absolutely have to.

    Votes: 7 5.7%
  • I don't have a local fish store.

    Votes: 5 4.1%
  • Other (please explain)

    Votes: 3 2.5%
Back
Top