Dosing Tropic Marin Balling Part C

[Tuan’s Reef]

So my SG has risen to 1.027 from the dosing regime. Need to bring this down thru diluation. How much do i dose Tropic Marin Balling Part C ? There is no guidance on the box.

 

[Randy Holmes-Farley]

Dosing a two part will always raise salinity. It's not a sign of overdose.

Randy's Dream Methodology

What husbandry would I do in a dream tank? (some of this may look familiar as some was posted elsewhere in other threads) In terms of water chemistry maintenance, I'd maintain calcium and alkalinity with limewater/kalkwasser (maybe pH limited to pH 8.55 or less to prevent overdose; probably on...

www.reef2reef.com

What calcium and alk parts are you using?

Is the Balling Part C solid or Liquid?

 

[Tuan’s Reef]

I am using BRS 2 Part Soda Ash for ALK, and Calcium Chloride for Ca. also Kalk. Balling Part C is liquid mixed from the instructions.

 

[Randy Holmes-Farley]

BRS Pharma Balling Method Bulk Total Package

Easily maintain calcium, alkalinity, trace elements, & magnesium in your reef! The BRS Pharma Hybrid Balling Method is the answer for implementing trace elements alongside the BRS two part you know and love. Easily make single or multiple gallons of each solution at a time with the bulk package...

www.bulkreefsupply.com

BRS Pharma Balling Method Part C (Tropic Marin) Mixing Instructions -Using a clean 1-gallon jug or container, fill it 1/2 full of RO/DI water. Add 4 scoops of Balling Part C to 1 gallon jug. Screw on the cap to the jug and shake it for about 10 seconds to start the dissolving process. Remove the cap and fill the container the rest of the way with RO/DI water. Replace the cap and give the container a few more shakes and let it sit until the salts are fully dissolved which should only take a couple hours. Dosing is based off your aquariums alkalinity dosage, and will twice that amount when using BRS Soda Ash.

 

[Reefer Dan]

BRS Pharma Balling Method Bulk Total Package

Easily maintain calcium, alkalinity, trace elements, & magnesium in your reef! The BRS Pharma Hybrid Balling Method is the answer for implementing trace elements alongside the BRS two part you know and love. Easily make single or multiple gallons of each solution at a time with the bulk package...

www.bulkreefsupply.com

BRS Pharma Balling Method Part C (Tropic Marin) Mixing Instructions -Using a clean 1-gallon jug or container, fill it 1/2 full of RO/DI water. Add 4 scoops of Balling Part C to 1 gallon jug. Screw on the cap to the jug and shake it for about 10 seconds to start the dissolving process. Remove the cap and fill the container the rest of the way with RO/DI water. Replace the cap and give the container a few more shakes and let it sit until the salts are fully dissolved which should only take a couple hours. Dosing is based off your aquariums alkalinity dosage, and will twice that amount when using BRS Soda Ash.

Just to add to Randy’s comments — the balling part C will also raise salinity (it is salt without a few things such as NaCl). The drift up is normal, so you will periodically want to either pull some water out of your aquarium and top it off with fresh or water changes to get the salinity down and compensate for this. Hope this helps.

 

[csturgis1989]

@Randy Holmes-Farley if I’m using your 2 part recipe #2 would it be 2 scoops of part c to one gallon? Thanks

 

[Randy Holmes-Farley]

@Randy Holmes-Farley if I’m using your 2 part recipe #2 would it be 2 scoops of part c to one gallon? Thanks

My recipe is identical to the BRS soda ash recipe (they took it from my article), so the BRS directions for using Balling Part C are identical (don’t use my part 3).

 

[csturgis1989]

@Randy Holmes-Farley I am using 1 1/4 cup calcium chloride for calc and then 1 1/8 cup of baking soda for alk, I thought this was half strength of BRS.

 

[Randy Holmes-Farley]

@Randy Holmes-Farley I am using 1 1/4 cup calcium chloride for calc and then 1 1/8 cup of baking soda for alk, I thought this was half strength of BRS.

Sorry, many fewer people use that recipe and I mistakenly assumed you were using the other one. That unbaked baking soda recipe is half the strength of my other recipe so use half as much Balling Part C.

 

[Sidsreef]

So my SG has risen to 1.027 from the dosing regime. Need to bring this down thru diluation. How much do i dose Tropic Marin Balling Part C ? There is no guidance on the box.

watch this video...its good

 

[csturgis1989]

Sorry, many fewer people use that recipe and I mistakenly assumed you were using the other one. That unbaked baking soda recipe is half the strength of my other recipe so use half as much Balling Part C.

Thank you, All of your content is very helpful!

 

[stlamarc]

BRS Pharma Balling Method Bulk Total Package

Easily maintain calcium, alkalinity, trace elements, & magnesium in your reef! The BRS Pharma Hybrid Balling Method is the answer for implementing trace elements alongside the BRS two part you know and love. Easily make single or multiple gallons of each solution at a time with the bulk package...

www.bulkreefsupply.com

BRS Pharma Balling Method Part C (Tropic Marin) Mixing Instructions -Using a clean 1-gallon jug or container, fill it 1/2 full of RO/DI water. Add 4 scoops of Balling Part C to 1 gallon jug. Screw on the cap to the jug and shake it for about 10 seconds to start the dissolving process. Remove the cap and fill the container the rest of the way with RO/DI water. Replace the cap and give the container a few more shakes and let it sit until the salts are fully dissolved which should only take a couple hours. Dosing is based off your aquariums alkalinity dosage, and will twice that amount when using BRS Soda Ash.

Hi,
Sorry for the obvious question here, but just to make sure I understand. You have to dose part C to the amount of (2x Alk (Soda Ash)) solution. But how frequently do you do the dosing of that solution?

Thanks in advance
Stephan

 

[Randy Holmes-Farley]

Hi,
Sorry for the obvious question here, but just to make sure I understand. You have to dose part C to the amount of (2x Alk (Soda Ash)) solution. But how frequently do you do the dosing of that solution?

Thanks in advance
Stephan

The timing is not very important, just the total amount. It could be added every day or even multiple times a day by dosing pump, but it can also be once a week or even less without any significant issues, IMO.

 

[DeputyDog95]

I'm up to 320ml/day of BRS Soda Ash for Alk, and am currently playing w their hybrid balling method. Adding 640ml/day of their "Part C" per the instructions, is moving my salinity up faster than when I was simply dosing another brand's 2 part. I was up about .7ppt in about 9 days and had to dilute back down.

I understand the ratios per the instructions... But do you really need to actually dose that much of the Part C for the balling method to work? Or is there a point of diminishing return when you pass a certain point of dosing the Soda Ash for Alk?

 

[Randy Holmes-Farley]

I'm up to 320ml/day of BRS Soda Ash for Alk, and am currently playing w their hybrid balling method. Adding 640ml/day of their "Part C" per the instructions, is moving my salinity up faster than when I was simply dosing another brand's 2 part. I was up about .7ppt in about 9 days and had to dilute back down.

I understand the ratios per the instructions... But do you really need to actually dose that much of the Part C for the balling method to work? Or is there a point of diminishing return when you pass a certain point of dosing the Soda Ash for Alk?

Yes, dose all that is recommended. It will boost salinity faster than a two part that does not contain the equivalent ions that are in balling part C.

 

[DeputyDog95]

Yes, dose all that is recommended. It will boost salinity faster than a two part that does not contain the equivalent ions that are in balling part C.

I am going to run through that part C fast! I may need to find a larger container dosing at these levels.

 

[csturgis1989]

I am going to run through that part C fast! I may need to find a larger container dosing at these levels.

Might be time to look into a calcium reactor.

 

[DeputyDog95]

Might be time to look into a calcium reactor.

Room for that is the issue... My stand is packed right now! But yeah, I think I'm heading in that direction. Fortunately or unfortunately, depending on how you look at it

 

[Bob Kukura]

I am going to run through that part C fast! I may need to find a larger container dosing at these levels.

I just mix the part C at double the concentration (8 scoops/gallon) and then dose equal volumes of all three parts (BRS soda ash and calcium chloride). I have not had any issues with mixing or precipitation. I currently dose 80 ml/day of each to my 65 gallon tank and remove about 0.5 to 1.0 gallons of saltwater per week to maintain salinity at 35 ppt.

 

[DeputyDog95]

I just mix the part C at double the concentration (8 scoops/gallon) and then dose equal volumes of all three parts (BRS soda ash and calcium chloride). I have not had any issues with mixing or precipitation. I currently dose 80 ml/day of each to my 65 gallon tank and remove about 0.5 to 1.0 gallons of saltwater per week to maintain salinity at 35 ppt.

That's an interesting idea. Have you ever tested the salinity of a batch like that? I think there's a point where salt mix will become saturated and fall out of solution, right?