HUB Edition Stream pumps just arrived in the US

[rvitko]

For those of you who have been waiting for the HUB edition pumps, they arrived yesterday, they have just started shipping to dealers, so far the 6040, 6055, 6095, 6105, 6255 have come in. Keep in mind that older models are still available, HUB edition pumps will have the designation xxxx.005 (6040.005 for example) and they will be slightly more expensive. Keep in mind they can still be run offline and set manually, this just enables them to be networked and programmed without any additional controllers via tunze-hub.de. In the next 2 weeks we should also receive the new 6075's as well as upgrade controller 7020.005 and all related cables.

 

[spsick]

Awesome! Still looking like a few weeks for 6150.005?

 

[rvitko]

I will try to get an update on the Stream 3 HUB editions.

 

[spsick]

I will try to get an update on the Stream 3 HUB editions.

Did you hear anything from the mothership @rvitko ?

 

[rvitko]

I have not, but to be honest I got sidetracked with year end preparation and orders, the staff is at a trade show in Holland but I have sent an email.

 

[rtparty]

When will we see these at retailers?

 

[rvitko]

The 6040, 6055, 6095, 6105, 6255 all shipped last week to AquaCave, Premium Aquatics and Marine and Reef. Please note that for a while both models are likely to be available (old and new) so be sure the description has model xxxx.005, xxxx.000 or xxxx.002 will be the older controllers.

 

[Dinukb]

Hi When will be the 6075 available in the USA? Also, will the 6025.500 mag extension will work on the new pump if the glass 19mm?

 

[rvitko]

Did you hear anything from the mothership @rvitko ?

The Stream 3 versions will likely come in January, unfortunately this is a different controller, different motor and has to be tested separately as a separate platform.

 

[rvitko]

Hi When will be the 6075 available in the USA? Also, will the 6025.500 mag extension will work on the new pump if the glass 19mm?

They are on the way, we expected them this week but they are held up in holiday shipping traffic. Yes, you can use 6025.500 for thicker glass.

 

[Dinukb]

Ahh okay. Sending a DM.

 

[spsick]

The Stream 3 versions will likely come in January, unfortunately this is a different controller, different motor and has to be tested separately as a separate platform.

Thanks Roger. I guess I’ll go with a 6105 Eco for now since it makes almost the flow at 25% the wattage.

 

[rishma]

I bought a hub addition 6040, it arrived today. I followed the directions, connected it to my WiFi and then the cloud. Seamless.

The flow control is outstanding! So many options and so much control. Its really neat! I’ve only just begun to play around with it. This is going to be fun!

 

[rvitko]

Felix Tunze just put this video up on the operation of the controllers for anyone interested.

 

[Flameback Pair]

Will the new cloud controller work with LEDs Tunze 8850?

 

[rvitko]

We will eventually have a version to control this and other lights, the pump version will not work for this application as it is a different control signal and pin configuration.

 

[DFR]

Hi @rvitko,
Are the new HUB Edition Stream Pumps able to be controlled using aquarium controllers(Apex, GHL, etc)?
Thanks

 

[rvitko]

Yes, you would use a phono jack cable from the controller company, the same one for example used on 0-10V control Kessil lights.

 

[DFR]

Thank you for the quick response!

 

[rvitko]

FWIW, you will also need to set the controller to analog, there are 3 main settings, Cloud, Manual and Analog. Cloud connects to Tunze Hub and you make all your settings there and can set hour by hour changes through the day, Manual is functionally the same as our older controllers, constant, pulse or wave all set on the controller, analog is an override for an external connected controller.