Heres a link to a short vid describing the electronics box thus far
Nice video! Does your enclosure get hot with the power supply inside? My fan on my power supply kicks on now and then when I crank the pump up.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Heres a link to a short vid describing the electronics box thus far
thank you so much, please if you can give little info or pictures on connections as well and are you using Wi-Fi Arduino?sure, I will try to post a list shortly. Pretty much everything off of amazon.
So far my most common error is roasting potentiometers by swapping hot and ground
Ravi for you, the box will need two more holes. one more for the second "mode" switch, and one more for the second thruster output cable. Pretty easy to execute though. If things do get warm, some vent holes would be easy to drill in the enclosure.
oh, also @sawdonkey I modded the thruster housing model so I think it should work for you. but you need to buy magnets to be able to JB weld them in place. Also, attaching the magnets is tough. they jump and attach to each other and I got JB weld all over me.
Thank you sir, I will keep my arduino, looking forward to see your how-to,You bet, I'll try to make a how-to.
I am using an Arduino Uno R4 Wifi, but honestly, it has a library problem with PWM outputs to drive electric motors that both me and sawdonkey had to work through, so I would use an R3 if I was starting over (or you just need to upload a new servo library to the R4). wifi is not essential since I am not yet using that function.
Hello sir, how is it going with your thrusters, did you add those in your tank yet?You bet, I'll try to make a how-to.
I am using an Arduino Uno R4 Wifi, but honestly, it has a library problem with PWM outputs to drive electric motors that both me and sawdonkey had to work through, so I would use an R3 if I was starting over (or you just need to upload a new servo library to the R4). wifi is not essential since I am not yet using that function.H
I am not sure that I follow. These thrusters are for submerged use as opposed to moving air. The blower motor would not be happy in water I am thinking.Have you considered a CPAP tube with a WS7040 blower. I think this would be much safer and is already pretty cheap.
Thank you sir, in regards to noise you are combating with thrusters , noise is coming from the motor part, I was dealing with same when I started using the thrusters, but I got over the sound against the performance, my thrusters turn off at night and no one is home during day, but if you find the solution that can make them quiet then it will be great,@sawdonkey if you want to make the real shroud im sure someone on here or in my reef club would pribt a set for you, then you just need the bolts and magnets.
Its a bummer about the sound level, im not sure how to combat that. Like i dont know what part of the system is generating the sound. It must be do-able since the pricey thrusters arent this loud.
Thats a great vid! Nice tank
@ravi197699 i am working on the parts list and how to this week. Got a little time after some rough family stuff
I’ve been up and running for over a month. This thing moves major water. I’m still using my makeshift shroud, but it works fine. Yes, it’s a bit noisy, but my tank is in my basement in a dedicated room where I’m typically playing music if I’m in there for any amount of time (as can be heard in this video).
Last night as I did a water change, my return pump was sucking air so I thought it would be a good opportunity to show the power of this pump. Sorry for the terrible video quality.
No worries this thread is active now! No critters getting sucked in, check out my most recent shroud. In past posts.I'm worries about how open it is. An invert or fish might easily get sucked in
Edit: lol I just saw the thread is 2 years old
I have been using the thruster with 3d printed shroud and no fish got sucked in so far,No worries this thread is active now! No critters getting sucked in, check out my most recent shroud. In past posts.
Thank you, sir!here is the file, this is what I have used for my thrusters,