fix

Well I drilled my return line too low. We did the math and my sump could handle it but to make sure it could I had to get creative. Its a 90 degree street into a split Y. This raised the water level up just enough so that the first ball of the flex is just slightly above the bottom of the...

Hello, Has anybody got an idea how to remove acrylic craft paint from under aquarium trim? To my understanding acetone will dissolve the acrylic, but I have seen mention that acetone can "soften" silicone, and I can't figure out one important detail of it, is this permanent? If the softening...

Hello, I was offered a 464 litre (about 125 gallons) acrylic cube tank (75*75*90 lwh [in cm]) for free, (tank is on its side in the photo).The tank is of course scratched, although the scratches are not deep and I think could be removed with some elbow grease. That of course then isn't my...

Here are my Parameters...I've had an ammonia reading for about a month or so now... How can I fix this? I have snails and a shrimp in my tank. Day 46 of fallow. Ammonia (API) 0.5 - 1ppm Ammonia (Salifert) 0.5ppm Nitrite (Salifert) 0.05ppm Nitrate (Salifert) 2.5ppm Phosphate (Salifert) 0-0.03ppm...

Hi, I have a Coralife 125g protein skimmer. It is just obnoxiously loud and throws microbubbles all over the tank and makes it look cloudy. I feel as though it is bothering the fish. If anyone else has the Coralife 125g skimmer or if you know of a good way to reduce or eliminate the microbubbles...

I am building and plumbing a 120 gallon with a sump. This is my first time plumbing anything and I may have made a mistake. The threaded connector which connects into my bulkhead is leaking on both sides from my return pump. I wrapped the threads in Teflon tape, but they are still leaking. The...

Not sure if this is the best place to post this, so feel free to move to more appropriate spot :o) So I got the dreaded "No water sample" error on my Neptune Trident, so figured I'd try to fix it to save time sending in to Neptune. First the problem.. Totally my fault. I bought it in Sept...

A friend of mine used it against my advice and claims his shrooms started dying the next day and xenia won't open.

I have a sea side aquatics coral viewer that has a slow leak. the viewer starts to fill up with water over 15-30 minutes when floating on the water. What can I use to repair the coral viewer?

Holding on to that Kessil that wont work any more because you just dont have the heart to throw away somthing that you spent hard earned cash on? I will buy your broken Kessil from you: A 150/ A 160- $10+ I'll pay shipping A 350/ A360- $20+ I'll pay shipping Think theres still a chance it will...

I have a precision marine protein skimmer and the pump crapped out on me today when I got home. I run my co2 scrubber off that so I'm worried about my ph and I've already been battling high nitrates so I need it fixed asap. It's an rlp 1000 and I am desperately trying to find a replacement for...

I have two Ecotech MP40s on my 120g DT facing each other. Last week, I came home and one of them was disconnected...no big deal happens all the time. The wet side slides off and falls to the substrate and the dry side stays on the glass. Well, I placed the wetside back where it belongs and...

I recently had to rebuild my tank due to leached heavy metals, so I used all new rockwork. That's a lot of aquascaping, so I decided to try the new AquaScape Fix by Fauna Marin. I have absolutely fallen in love with it, so I decided to do a quick video on how I use it. Note that it has no...

Hey everyone. I have been trying to find information on assembling a 155 gallon bowfront aquarium. I was just going to do a re seal on it but there are a few spots that dont look too great in my opinon. So I was curious if there are articles that anyone knows of or has experience with taking one...