- Joined
- Aug 27, 2018
- Messages
- 86
- Reaction score
- 67
Well slowly fixing and tweaking somethings. Turns out the pump I purchased for the algae scrubber is a wave dc pump only but it is actually working really well as far. Used almost 250 lbs of rock in the display and put at least 50 lbs in the sump from the old setup . Also did not stack anything on the back so there is a ton of swimming area for some big fish. All the fish have been in for a few hours now and seems to be going well.
I could use some help with micro bubble issues from my drains into the sump as well as the insane about of bubbling noise it is creating. All drains are straight piped into the sump and 2 inches below surface of the water . No filter socks are being used and I know that would probably help with both issues but is there any other fix? I guess the only thing left is a few pics.
20200415_193238 by
[url=https://flic.kr/p/2iQMr1S]2020-04-15_11-14-14 by
[url=https://flic.kr/p/2iQK1AU]20200415_072534 by https://www.flickr.com/photos/95924624@N04/
I could use some help with micro bubble issues from my drains into the sump as well as the insane about of bubbling noise it is creating. All drains are straight piped into the sump and 2 inches below surface of the water . No filter socks are being used and I know that would probably help with both issues but is there any other fix? I guess the only thing left is a few pics.
20200415_193238 by
[url=https://flic.kr/p/2iQMr1S]2020-04-15_11-14-14 by
[url=https://flic.kr/p/2iQK1AU]20200415_072534 by https://www.flickr.com/photos/95924624@N04/