AliExpress A8SE Reef Light

kimkevin12

New Member
View Badges
Joined
Apr 16, 2024
Messages
3
Reaction score
0
Location
usa
Rating - 0%
0   0   0
Hello it's me again

Same as me... "asking update time"
Automatic hrs don't work good.

Have you change GMT manually?
App stop to ask and its was working good.


Screenshot_20231229_155945_AIPAI.jpg

Screenshot_20231229_155957_AIPAI.jpg
Despite setting the timezone initially, every time I power cycle the light, all settings including WiFi, schedule, and time are lost. Additionally, while I'm running version 2.1.1, you're on 2.1.0, suggesting potential issues with the newer version.
 

Tonyljp

New Member
View Badges
Joined
Apr 13, 2024
Messages
4
Reaction score
7
Location
Japan
Rating - 0%
0   0   0
I'll try to help anyone who isn't able to configure it. My English is bad, I'm using a translator.
First start from scratch. I'll start by assuming that the connection to the app is already correct. On the first screen, set the UTC( It has to be the right UTC for your region, otherwise it won't work).
Enter to configure it will synchronize the time, now press save device. Turn off the lights with the app open, wait a few seconds, turn it on again and configure it and save it with the name you want, press save device again. Just that. To see if it's working, go to the app to configure it, it shouldn't ask you any more to synchronize the time.
 

Borat

Valuable Member
View Badges
Joined
Apr 4, 2021
Messages
1,575
Reaction score
1,882
Location
United Kingdom
Rating - 0%
0   0   0
not exactly what you wanted but here’s my recent findings. Down below I wrote how I programmed it; a common problem for users and the biggest hurdle in my opinion:

Previously I ran Kessils for several years... Until they all magically died at the 2 year mark. I liked the look but they didn’t grow things well. I moved on to Radions which grow things really really well but create more of a T5 look (no shimmer). The A7 comes on around noon and runs into the evening so I get a late evening shimmer as the Radions power down on the AB+ schedule.

I purchased an A+ A7 online for less than alieexpress from “aquarium low cost” to add some accent lighting to my tank. It took about 30 days to arrive. I have another 2 on order and they’re taking a bit longer. The power supply died literally within the first 5 minutes so I upgraded it for now (The seller is sending me a new one).

It’s a Kessil A360x (more or less) and unless you have them side-by-side or have run Kessils you won’t know the difference. The light matrix isn’t as tight as the Kessil as others have stated online. Fortunately this is an easy fix by using one of the two included reflectors (90 degree and 55 degree) to redirect and focus the light. I think I paid $115 for the light and it comes with what Kessil charges $50 for in reflectors. The Kessil 35degree reflector also works on the A7 too to get a super tight beam for a clam or Anemone or to roast marshmallows.

It has a single 1/4-20 screw hole on top for mounting. I purchased a 1/4-20 x 1/2” carriage bolt at Lowe’s and an $11 swivel camera mount from Amazon and it slid easily on an RMS mount between my Radions. It can now be directed and locked in place. That thread size is common for mounts for cameras and things so mounting options are nearly limitless.

You will need the app to program it. The knobs don’t do anything meaningful. The problem? It’s in Chinese. They made an attempt at a US app but it’s broken as they forgot to make the “upload to device” button active. So…you HAVE to use the Chinese app.

How to program ANY OF THESE LIGHTS if you don’t speak Chinese: In the instruction manual is a QR code for the apps. DO NOT choose the one with English writing. Choose the Chinese one. Download it on a tablet. I assume most people own a tablet these days but if no, buy one on Amazon for $50 (You are still at less than 1/2 the cost of the kessil).

Download Google Translate on your phone and select Chinese (simplified) to English. Use the photo/live translate button. Hold your phone over the tablet with the app open. Voila! It converts everything on the tablet into English in real time as you use the app on the tablet. The app is just color sliders and setting intensity points on a timeline, saving your program, then uploading it to the device.
..or learn Chinese. Very useful skillset nowadays.
 

John Doe

Active Member
View Badges
Joined
Apr 15, 2024
Messages
229
Reaction score
1,165
Location
taiwan
Rating - 0%
0   0   0
..or learn Chinese. Very useful skillset nowadays.
I'm pretty good at this (but I always ask Google Translate for the English parts lol)My English is not very good.
 
Last edited:

CristinaNTimothy

Active Member
View Badges
Joined
Dec 2, 2023
Messages
105
Reaction score
102
Location
Brampton, Ontario
Rating - 0%
0   0   0
Since updating to the 2.1.1 mine has been a pain. Everything was going smoothly with previous version now it just keeps saying “reading” wile the circle keeps spinning in the center of the screen. My utc is correct and saved but I need to touch the clock and update then I can get rid of the reading part wile in lamp screen. Even After saving I got to do it again every time I go into the lamp screen despite saving when done.

The funny part is it is keeping schedule as I have set it but every time I go in I have to hit the clock for it to rectify.

Anyone else have this issue? Even though it’s saved and utc is correct?
 

CristinaNTimothy

Active Member
View Badges
Joined
Dec 2, 2023
Messages
105
Reaction score
102
Location
Brampton, Ontario
Rating - 0%
0   0   0
So I was just playing with the app and no problem whatsoever wile in Chinese version but the issue I have is on the English side. Hopefully this gets resolved on the app and if not not a big deal as I’m familiar with it by now and know pretty much how to navigate the app without the need for English.
 

Nightwatch-Swe

New Member
View Badges
Joined
Feb 7, 2024
Messages
13
Reaction score
29
Location
Sweden
Rating - 0%
0   0   0
Hello and greetings from Sweden. i have taken a chance at these lights ( the x30 blue with meanwell power) since here i get 8 of these lights for the same cost as 1.5piece of ecotec gen 5 blue, and that is including shipment. If its possible, could you send me your file for setup, the english version is stated to be better but im thinking your guide/troubleshoot can be handy aswell. Thank you in advance.
 

tgn225

New Member
View Badges
Joined
Sep 7, 2023
Messages
14
Reaction score
9
Location
Houston
Rating - 0%
0   0   0
I’ve ordered the A8 Pro (G6 radion clone) and have been happy with it so far. I’ve taken it apart to apply thermal paste to the heating and the components seem to be of high-quality. I’ve had no issues programming the lights in English and any issues that I did have were communicated to the vendor which they quickly solved and pushed updates to the app. I have yet to measure the par coming off of the lights, but they seem to pack a punch. I also made some custom light mounts as I did not like the ones they offered.

IMG_6189.jpeg IMG_6188.jpeg IMG_6184.jpeg
 

Hooz

Valuable Member
View Badges
Joined
Aug 16, 2020
Messages
1,624
Reaction score
1,702
Location
Heath, OH
Rating - 100%
1   0   0
I’ve ordered the A8 Pro (G6 radion clone) and have been happy with it so far. I’ve taken it apart to apply thermal paste to the heating and the components seem to be of high-quality. I’ve had no issues programming the lights in English and any issues that I did have were communicated to the vendor which they quickly solved and pushed updates to the app. I have yet to measure the par coming off of the lights, but they seem to pack a punch. I also made some custom light mounts as I did not like the ones they offered.

IMG_6189.jpeg IMG_6188.jpeg IMG_6184.jpeg

Can you post some screenshots of the channel control? Is it 8 channels as stated? How about time programming? I haven't seen many detailed shots of the app, and these lights are really intriguing me. :D
 

tgn225

New Member
View Badges
Joined
Sep 7, 2023
Messages
14
Reaction score
9
Location
Houston
Rating - 0%
0   0   0
Yup! It’s 8 channels as advertised.
There’s also an option within the Chinese configuration to download user profiles. I’m currently running the Darden schedule
 

Attachments

  • IMG_6191.png
    IMG_6191.png
    361.5 KB · Views: 199
  • IMG_6190.png
    IMG_6190.png
    130.3 KB · Views: 193

RoanokeReef

Active Member
View Badges
Joined
Feb 27, 2009
Messages
464
Reaction score
443
Location
Roanoke, VA
Rating - 0%
0   0   0
Mine are running pretty cool @ 80%. Wonder if it's actually needed. The XR15 Pro I converted to a blue had barely any and was missing paste on most of the LEDs.
 

OscarHaglund

Active Member
View Badges
Joined
Dec 27, 2021
Messages
278
Reaction score
319
Location
Stockholm, Sweden
Rating - 0%
0   0   0
I will be going to china this summer where these lights can be gotten even cheaper than on aliexpress. My only concern is this issue with loosing all their settings when power cycled. If that could be fixed then this would be a no brainer for me.
 

RoanokeReef

Active Member
View Badges
Joined
Feb 27, 2009
Messages
464
Reaction score
443
Location
Roanoke, VA
Rating - 0%
0   0   0
I will be going to china this summer where these lights can be gotten even cheaper than on aliexpress. My only concern is this issue with loosing all their settings when power cycled. If that could be fixed then this would be a no brainer for me.
I don't have this issue, and wasn't it only one person in this thread or did I miss some? Anyways there is a battery on the board, wonder if theirs is dead?
 

TOP 10 Trending Threads

WHICH OF THESE CREEPY REEF CRITTERS IS MOST LIKELY TO GIVE YOU NIGHTMARES? (PICTURED IN THE THREAD)

  • The Bobbit Worm

    Votes: 48 65.8%
  • The Goblin Shark

    Votes: 4 5.5%
  • The Sea Wolf

    Votes: 0 0.0%
  • Giant Spider Crabs

    Votes: 1 1.4%
  • The Stargazer Fish

    Votes: 5 6.8%
  • The Giant Isopod

    Votes: 9 12.3%
  • The Giant Squid

    Votes: 1 1.4%
  • Other (Please explain!)

    Votes: 5 6.8%
Back
Top