what is the acceptable average temperature ?Correct, the leds are mounted to an aluminum plate which has contact with the heat sink. No thermal compunds
40c⁰ ?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
what is the acceptable average temperature ?Correct, the leds are mounted to an aluminum plate which has contact with the heat sink. No thermal compunds
Doesn't seem crazy to me depending on the percentage. What percentage are you running at?what is the acceptable average temperature ?
40c⁰ ?
Filling any new tanks yet?! Every few weeks this thread comes up on my feed and I remember you were waiting on a few and I get excited for you lol30 days out
The light is inside a canopy with a hole for the fan.Doesn't seem crazy to me depending on the percentage. What percentage are you running at?...
Well there is no way to give you that answer..The light is inside a canopy with a hole for the fan.
white, red, green 10% and blue etc. 60%. It climbs to around 38-40c⁰.
My problem is that I have t5s too... I tried it once... I stopped at 48c⁰... I'm going to put a fan....
But I would like to know the "safe" temperature that the ramp can reach.
If you want a rule of thumb w/ no guarantees.. keep the heat sink under 48.9CConclusion
The heat dissipation performance of LED fixtures depends on a number of factors, materials, interfaces, geometries, and environmental conditions.
You just didWell there is no way to give you that answer..
...I purchased the X30 blue but it won't fit in the Aquaticlife t5 hybrid fixture. I need to
Rearrange the plug to the side of the fixture. Does anyone know where I can buy this power adapter? Looks like a 2 pin pcb to male jack?
Why not extend the wire and drill a hole on the sideI purchased the X30 blue but it won't fit in the Aquaticlife t5 hybrid fixture. I need to
Rearrange the plug to the side of the fixture. Does anyone know where I can buy this power adapter? Looks like a 2 pin pcb to male jack?
That was the plan but the wire was damaged when pulling it out.Why not extend the wire and drill a hole on the side
Cut the barrel off and than cut the end if the cable that plugged into the barrel and solder together. You’ll still have a disconnect. I’ll post a picture as that’s what I did.That was the plan but the wire was damaged when pulling it out.
There is a r2r thread about these.Anyone have any experience with this light? Just found it browsing AliExpress and thought it looked to be a pretty good knock off of the XR30
AliExpress A8SE
I tried searching but nothing came up unless I was searching wrong
Yea there’s a bug in the update pack. Remove the app and reinstall. When it prompts you to do the update pack decline it.Having troubles syncing to local time, tried in both english and chinese version. When it prompts to auto adjust the time to current time, I click ok and then it starts to synchronize and then it just gets stuck, with the wheel just continuing to spin. Any ideas?
Do I need to reinstall the app and reset the lights? Also do I need to do this in chinese?Yea there’s a bug in the update pack. Remove the app and reinstall. When it prompts you to do the update pack decline it.
So frustrating trying to get these things to workYea there’s a bug in the update pack. Remove the app and reinstall. When it prompts you to do the update pack decline it.