Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Funny is now that you mention, I live not far from him and have not heard anything with him in about 2 years. . . hmmmSo what happened to Bill Wann and his AE business??
Oops, sorry I missed your question. You should see bubbles recirculating if you have CO2 being pushed into the lid of the ACR. Failure to have bubbles usually means the water level is right to the top of the lid and the re-circulation line is sucking water and not gas. Assuming you have the tubing to the venturi hooked up correctly.@Dennis Cartier
I have turned co2 on, now system is generating demand
I see ph gong down in acr (6.6 relative to system 8.0)
However i am not seeing bubbles in acr
whats worse is i am getting leaks at seal between bottom stage (mg media) and upper stage stack.
I am draining acr to inspect o ring seal at stack
i assume the co2 pressure buildup is lending to leak; yet i dont see bubbles recirculating in acr or gas/air at top of lid
thoughts?
Sorry for jumping in a couple months later. I read through your versions of DIY for the ACR. But in the end, it seemed like you were waiting to see the "new controller with the peristaltic pump". Have you worked with that new version? I have one and am trying to figure it out.Well as long as your ACR is physically intact, I can help with controller issues. Mainly scrap the factory one and build a DIY one. In the ACR review thread, I have posted 3 different versions of DIY controllers that will get ACR's working where the factory controller has failed.
https://www.reef2reef.com/threads/e...automatic-calcium-reactor.764943/post-9752903