- Joined
- Apr 13, 2016
- Messages
- 4,827
- Reaction score
- 3,493
Hey all! I've been meaning to work on my 40 gal breeder frag rack. Since I have the day off, I'm documenting it for you
Materials:
1/4" acrylic sheet. (I bought a black 12x24". You could also use 3/8") bought on amazon
Handheld power drill (make sure you have extra batteries)
White permanent marker (or black if you're using clear acrylic)
1/2" forstner bit
5 gal bucket
Old frag rack (template)
Vacuume
Pic of materials:
Step one:
Put the critters away...don't want them eating the acrylic bits.
Step two:
Mark where you want the holes to be.
Step three:
Start drilling!
Short break-battery died
I got through 38 and a half holes
Materials:
1/4" acrylic sheet. (I bought a black 12x24". You could also use 3/8") bought on amazon
Handheld power drill (make sure you have extra batteries)
White permanent marker (or black if you're using clear acrylic)
1/2" forstner bit
5 gal bucket
Old frag rack (template)
Vacuume
Pic of materials:
Step one:
Put the critters away...don't want them eating the acrylic bits.
Step two:
Mark where you want the holes to be.
Step three:
Start drilling!
Short break-battery died
I got through 38 and a half holes
Last edited: