Acabei de fazer um teste se ligaria o disco de leds. melhor será em série, isso?Cat 6 23 ga. fio deve funcionar melhor.
Pensou que estava colocando 4 em série?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Acabei de fazer um teste se ligaria o disco de leds. melhor será em série, isso?Cat 6 23 ga. fio deve funcionar melhor.
Pensou que estava colocando 4 em série?
OK, just be careful not to wreck the pads with the solder/un-solder cycle.Acabei de fazer um teste se ligaria o disco de leds. melhor será em série, isso?
Err but difficult to understand but if you are referring to 2 of those in series, the largest channels are 14 volts so 2 x 14 = 28I can put power supply of 48V and 2 A to two board of leds This Radeon Clone?
What power supply to this project? O have two pucs but no mint and suplementoWell, she's mostly cleaned and buttoned up. Final load out is 8 Blue (700ma), Royal Blue (700ma), Cool White (350ma), 4 Mint (1A) 8 Violet (700), 3 HyperViolet (700), 4 395nm (700), 2 amber (700ma).
Now need to sort out getting pwm, gnd, and power to the fixture. I'm thinking cat6 for pwm, problem is I need 9 conductors to run 8 channels one to carry gnd . Easiest solution I suppose is to link two of the channels into one, maybe Blue and Royal Blue or Violet and HyperViolet.
As for connectors, maybe back to aviation connector for power and I suppose Cat5/6 for pwm signal.
Gotta fix those upper few wires, driving my OCD crazy.
I did put this power supply and BOOM . CrashErr but difficult to understand but if you are referring to 2 of those in series, the largest channels are 14 volts so 2 x 14 = 28
Then add the differential of 3-4 volts.
32v or larger power supply.
You will only be able to put 2 in series.
You could run them in 2 x2 series/ parallel but that just splits the current
Now as to current...
W = V x A.
Calculate it for each channel and add
Neither the LEDs nor the driver board are very taxing on a power supply.I did put this power supply and BOOM . Crash
4 pucaOr i can Connect all 5 pucs inglês power supply de 56v and 240w?
Running 4 in series AND controlling each of 7 channels individually is going to be expensive.
3 in 1 DIMMING
0~10VDC, PWM, or resistance signal dimming function