Just wanted to share that we have tested and are using the following controllers to dim the DX18 hybrids.
If there are any other suggestions on controllers we should look into, please let us know.
Want to thank Neptune Systems and GHL for their support in testing the controllers with the DX18.
@Terence and @Vinny@GHLUSA @Matthias Gross
- Both Apex and the Apex classic have been tested. The Apex Classic is operating on my 315 test tank in the office and the Apex we have been using at the consumers shows. Both have been working as we hoped and no surprises. We are using our Halo Apex cable #470398, its a stereo cable and supports the dual channels of the DX18 and plugs directly into the V1/V2 ports of the Apex.
- We just set up the GHL Profilux Mini this week too. Modified a 3.5 stereo cable to connect to the RJ11 jack and we are up and running as of yesterday. We have not had a chance to test the other GHL controllers but I can only imagine that they too would work the same as the Mini. If anyone needs I have the pin layout for the RJ11 or we can modify one of the Archon cables to a RJ11 for the Profilux.
- Lastly we have an Archon controller from DA that we have been using for years and it also was tested with the DX18 and no problems. We use our Halo Archon cable #470409 to connect to the controller and the fixture.
If there are any other suggestions on controllers we should look into, please let us know.
Want to thank Neptune Systems and GHL for their support in testing the controllers with the DX18.
@Terence and @Vinny@GHLUSA @Matthias Gross
Last edited: