Inside Cabinet Lighting
- Thread starter jolt
- Start date
- Tagged users None
Ed Bortoni
New Member
Do you mean for general visibility? Or to light fuge etc? I'm trying to figure out something for general light as well so I'm following this thread!
Look at IKEA. They have some inexpensive LED strips for closets that are motion activated. I just added them to my dry side of my cabinet, and they work great. Really bright too!
tomtom2245
Well-Known Member
If your just looking for general lighting, search 'tap light' on Amazon. There are a ton of options. Some are 4/$5 and battery powered so no concern about having another plug.
akaemu
Active Member
I use these for general lighting mounted via Velcro because I don't want to put holes in my stand.
https://www.amazon.com/gp/aw/d/B001...SX236_SY340_QL65&keywords=under+cabinet+light
I've tried the battery power touch lights also but I either have a ghost or salt did something to them making them come on by thereselve
https://www.amazon.com/gp/aw/d/B001...SX236_SY340_QL65&keywords=under+cabinet+light
I've tried the battery power touch lights also but I either have a ghost or salt did something to them making them come on by thereselve
jsker
Reefing is all about the adventure
Staff member
Super Moderator
Partner Member 2024
Excellence Award
Reef Tank 365
Article Contributor
Hospitality Award
Ocala Reef Club Member
R2R Secret Santa 2023
My Tank Thread
I have two of these and the really work well, Under cabinet light
Last edited:
p7willm
Active Member
I control my lights with a magnetic switch on the cabined door and my Apex. When I open the door the lights come on. I have a fluorescent on one side and an LED strip on the other. If I had it to do over again, or when the fluorescent dies, I will use LEDs on both sides.
The Fluorescent needs to be screwed in to avoid falling into the sump and the LEDs are stuck up with a bit of double sided tape. Ikea has cheap, less than $20, LEDs that come with strips you can wire together. My cabinet has 2 sides separated by a wall so I need something on each side.
The Fluorescent needs to be screwed in to avoid falling into the sump and the LEDs are stuck up with a bit of double sided tape. Ikea has cheap, less than $20, LEDs that come with strips you can wire together. My cabinet has 2 sides separated by a wall so I need something on each side.
OP
OP
jolt
Well-Known Member
Not refugium, but something that illuminates the interior when I open the doors.
p7willm
Active Member
My cabinet has 2 separate section so this was better for me
http://www.ikea.com/us/en/catalog/products/20119418/ It was easy to stick to the ceiling of the cabinet. And for an extra $10 you can get a set that changes colors if you want to setup a disco under your tank.
http://www.ikea.com/us/en/catalog/products/20119418/ It was easy to stick to the ceiling of the cabinet. And for an extra $10 you can get a set that changes colors if you want to setup a disco under your tank.
OP
OP
jolt
Well-Known Member
Tempting, multicolor *and* remote control ... How do those attach?
Also, after you've worked with them do you feel the humidity in the sump area will be any issue?
Last edited:
OP
OP
jolt
Well-Known Member
My cabinet has 2 separate section so this was better for me
http://www.ikea.com/us/en/catalog/products/20119418/ It was easy to stick to the ceiling of the cabinet. And for an extra $10 you can get a set that changes colors if you want to setup a disco under your tank.
I like the price! Same questions: besides double sticky tape, are there mounting clips?And, how do you think they will handle the sump area humidity over time?
OP
OP
jolt
Well-Known Member
I think I might have been thinking too 'industrial'. I do want to avoid batteries because I want to control with my apex. And, I was imagining an outdoor rated aluminum unit. But the best price I could find for that is an $80 unit at my local Home Depot. I thought I should be able to find something similar and less pricey online, but so far no luck. Seems like nobody is going that route though ...
masterbuilder
Community Member
I used Even-Glow strips from superbrightled.
I prefer the type that mount with 2 tiny screws, dont have to ever worry about it falling.
I prefer the type that mount with 2 tiny screws, dont have to ever worry about it falling.
Last edited:
OP
OP
jolt
Well-Known Member
Yes, that is along the lines of what I was thinking. Based on how bright your unit is, do you think this one would handle a 48" wide cabinet?
https://www.superbrightleds.com/mor...high-power-led-waterproof-light-fixtures/622/
dbrewsky
Active Member
I went the IKEA route and have been pleased! I put 3 strip light kits to light the sump and a few of the pucks in my equipment cabinet. One day i will get around to installing door switches to turn them on automatically!
Peel and stick, yeah don't know how they would perform in high humidity, there is no sump under my stand
Similar threads
