- Joined
- Jul 26, 2018
- Messages
- 499
- Reaction score
- 213
Is my bubbles are OK?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That's not a bad idea. I have some co2 diffusers I may give a tryI haven’t read through the 41 pages, but has anyone tried using a Mazzei injector? I’ve used one previously on a FW tank to inject CO2 and I would get a very fine mist.
When you need to inject air, oxygen, or ozone into water, a venturi injector is one of the best methods to use. Tests have shown that when installed properly, these injectors can transfer ozone into water with efficiencies as high as 99%. While typically used for ozone, air, or oxygen injection, venturi injectors are also compatible with liquids.
The idea behind bubble scrubbing is to produce small nano bubbles. Larger bubbles can irritate your corals which is why most sumps have bubble traps.Would bigger bubbles help in anyway, i have just set up a overflow box and sump to my existing DT and have my air nipples on the overflow hooked up to a power head via venturi.
Once every few minutes i get a few spurts of tiny bubbles out of my power head as it sucks air from the overflow.
Would this be of benefit?
I've got some really nice diffusers from GLA from my planted that I may give a tryThat's why I mentioned the Mazzei several posts back. When I was using one for CO2 injection in my FW tank, it produced what looked like fog. I wish I still had it to try.
The idea behind bubble scrubbing is to produce small nano bubbles. Larger bubbles can irritate your corals which is why most sumps have bubble traps.
I don't do bubble scrubbing but have been searching. Seems a lot of people put the air stone in their bubble trap section to allow the larger bubbles to rise to the surface so only the smallest bubbles return to the tank
Is there data that shows larger bubbles irritate corals? When you think about ocean waves you get all different bubble sizes.
I thought the reason for the various up and down water motion in a sump was to remove bubbles because most people don't like to see bubbles in their DT.
Actually directed large bubble stream, aimed at corals manifest irritation and bleaching at the point where the stream of large bubbles "bump" into the coral.
We believe it is a sign of irritation and presume that intermediate cavitation and large bubble irritation is the cause. But that assumption is anecdotal and just an observed affect.
I was meaning sps... LPS and Softies are more resilient. Definitely a veritable observation.My one candy cane coral is right in the path of the bubbles. The bubbles appear to be small to medium in size. It has never looked better. It is growing new heads, and the existing heads are nice and large. I do have a large War coral and a couple of SPS corals also in the bubble path. All look very healthy and happy. Just my observation.
Fresh outside air is lower in co2... we believe it is key in the success of this method.Would bigger bubbles help in anyway, i have just set up a overflow box and sump to my existing DT and have my air nipples on the overflow hooked up to a power head via venturi.
Once every few minutes i get a few spurts of tiny bubbles out of my power head as it sucks air from the overflow.
Would this be of benefit?
You'd need more water flow (gph) and pressure (psi) with the mazzei...I haven’t read through the 41 pages, but has anyone tried using a Mazzei injector? I’ve used one previously on a FW tank to inject CO2 and I would get a very fine mist.
When you need to inject air, oxygen, or ozone into water, a venturi injector is one of the best methods to use. Tests have shown that when installed properly, these injectors can transfer ozone into water with efficiencies as high as 99%. While typically used for ozone, air, or oxygen injection, venturi injectors are also compatible with liquids.
I'm also just hearing about this method and have only read a few pages. But my first question is, for many years we've complained about our skimmers putting micro bubbles into our display, mostly new skimmers and we're always told to hang in there, and once it's broken in they'll be gone ! OH MY GOD,.....THERE GONE NOW,....WHEW !!!
So what's the difference between those nasty bubbles we all hate VS this "micro-bubble method" ?