There seems to be a lot of Kalkwasser threads going on right now so I thought I would share my DIY drip bucket.
I used a 1 gallon bucket and one 1/4" airline valve. I just drilled a 1/4" hole about 1/2" up from the bottom of the bucket and glued the valve in, took less than 5 min and less than 5 dollars to do!
You can see the valve inside of the bucket, you need to leave at least 1/2" for the undissolved Kalk to settle in.
The valve gets plugged from time to time so I just take my needle and syringe that I use for Kalking Aptaisia and clean the valve out by running the needle through it.
I used a 1 gallon bucket and one 1/4" airline valve. I just drilled a 1/4" hole about 1/2" up from the bottom of the bucket and glued the valve in, took less than 5 min and less than 5 dollars to do!
You can see the valve inside of the bucket, you need to leave at least 1/2" for the undissolved Kalk to settle in.
The valve gets plugged from time to time so I just take my needle and syringe that I use for Kalking Aptaisia and clean the valve out by running the needle through it.