My rodi unit cracked
- Thread starter vcnt
- Start date
- Tagged users None
Dude, get a new one. there like 20 bucks or so at BRS.
OP
OP
vcnt
Active Member
its not a brs unit, the pressure gauge was attached into the membrane capsule. I cracked the membrane capsule
EasternShoreman
Community Member
Standard RO Membrane Housing
These standard RO membrane housings are long-lasting and offer wide membrane compatibility. Membrane housings are relatively standard across the industry, and these housings will fit standard 10" RO membranes, such as the popular Dow Filmtec 75 GPD membranes. Made with high-quality components...
www.bulkreefsupply.com
You can likely frankenstien something together even if your unit is built by a different OEM.
You don't have to have the gauge threaded into the RO Membrane Housing (capsule). Just T off.
Also, rule of thumb, you always want to avoid threading metal onto plastic FIP. They always crack.
Manpeckz
Active Member
good man @EasternShoreman well, and @magallonbuckinbulls
+1 looks like you can remove that plastic that houses the double membrane unit and just replace the one with the pressure gauge. best of luck.
+1 looks like you can remove that plastic that houses the double membrane unit and just replace the one with the pressure gauge. best of luck.
OP
OP
vcnt
Active Member
Standard RO Membrane Housing
These standard RO membrane housings are long-lasting and offer wide membrane compatibility. Membrane housings are relatively standard across the industry, and these housings will fit standard 10" RO membranes, such as the popular Dow Filmtec 75 GPD membranes. Made with high-quality components...
You can likely frankenstien something together even if your unit is built by a different OEM.
You don't have to have the gauge threaded into the RO Membrane Housing (capsule). Just T off.
Also, rule of thumb, you always want to avoid threading metal onto plastic FIP. They always crack.
If I get a new capsule w/o hole for pressure gauge, would that be okay and just get a brs gauge? If so, does the gauge go in waste or pure line?
Similar threads
