So, wanted to get a quick check on my logic to help me with dosing Britewells Phosphat-E.
The instructions say that 1ml removes 1ppm in 4 gallons of water or .25ml/gallon => 1ppm drop
My doser (Jebao 2.4 wifi) can only dose in whole ml so I dilute my Phosphat-E by 3 (500ml Phosphat-E bottle into 1000ml rodi for a 1500ml solution at 1/3 potency).
Tank is 120 gallon and with the sump, I'm using that as the total water volume.
So if I dose 1ml/hr every hour I should expect:
Total product dosed: 8 ml (24 * 1/3 from dilution)
Phosphate-E needed to drop 1 ppm: 120 gallons * .25ml/gallon -> 30 ml
So expected drop/absorption of 8ml Phosphat-E into 120 gallons of water -> 8ml/30ml => 0.267 ppm
Does that look correct?
Thanks,
-Chris
The instructions say that 1ml removes 1ppm in 4 gallons of water or .25ml/gallon => 1ppm drop
My doser (Jebao 2.4 wifi) can only dose in whole ml so I dilute my Phosphat-E by 3 (500ml Phosphat-E bottle into 1000ml rodi for a 1500ml solution at 1/3 potency).
Tank is 120 gallon and with the sump, I'm using that as the total water volume.
So if I dose 1ml/hr every hour I should expect:
Total product dosed: 8 ml (24 * 1/3 from dilution)
Phosphate-E needed to drop 1 ppm: 120 gallons * .25ml/gallon -> 30 ml
So expected drop/absorption of 8ml Phosphat-E into 120 gallons of water -> 8ml/30ml => 0.267 ppm
Does that look correct?
Thanks,
-Chris