@robsworld78 and @Ranjib. I am starting to draw the plans for my DIY stand and planning where equipment will go so have some questions to ask you both. My build will be a 180g tank of which 120 wi be the main display and 60 will be for seahorse tank. Will likely do all lights on same dimmable program, have separate heat controls, separate flow control, and separate temp/pH/alk testing. Questions:
1. Can I run more than 1 tank on the same power brick?
2. Can RoboTank w/ ReefPi handle more than 1 tank with a the tasks listed above and or more than 1 powerbrick or will I need 2 RoboTanks?
3. I will lily start out with a fixed monitor screen mounted to control panel. Will a RaspberryPi touch screen work ok? I am also assuming that I can use a ready made screen and don’t need to do a PC kit with another R-Pi.
4. What other planning strategies do I need on my radar?
Hope these arent dumb questions to be asking. The main thread is difficult to traverse. Would be great if you had some basic guidelines on sticky threads and your own forum here on R2R.
1. Can I run more than 1 tank on the same power brick?
2. Can RoboTank w/ ReefPi handle more than 1 tank with a the tasks listed above and or more than 1 powerbrick or will I need 2 RoboTanks?
3. I will lily start out with a fixed monitor screen mounted to control panel. Will a RaspberryPi touch screen work ok? I am also assuming that I can use a ready made screen and don’t need to do a PC kit with another R-Pi.
4. What other planning strategies do I need on my radar?
Hope these arent dumb questions to be asking. The main thread is difficult to traverse. Would be great if you had some basic guidelines on sticky threads and your own forum here on R2R.