OP
OP
syedjilani
Active Member
Some close up of Blue Zoas.
SYED's 200G Rimless Reef
- Large Build
- Thread starter syedjilani
- Start date
- Tagged users None
Some close up of Blue Zoas.
OP
OP
syedjilani
Active Member
Birdsnest Coral (Seriatopora hystrix)
OP
OP
syedjilani
Active Member
Red Branched Montipora Coral (Montipora digitata)
OP
OP
syedjilani
Active Member
Lyretail Anthias (Pseudanthias squamipinnis)
OP
OP
syedjilani
Active Member
Bicolor Dottyback (Pictichromis paccagnellae)
OP
OP
syedjilani
Active Member
See the comparison Growth of grape caulerpa
25th September 2013
31st October 2013
OP
OP
syedjilani
Active Member
New Addition - Lyretail Anthias Male (Pseudanthias squamipinnis)
OP
OP
syedjilani
Active Member
New Addition - Carberryi Anthias (Nemanthias carberryi)
OP
OP
syedjilani
Active Member
New Addition - Lyretail Anthias Female(Pseudanthias squamipinnis)
OP
OP
syedjilani
Active Member
New Addition - Purple Tang (Zebrasoma xanthurum)
OP
OP
syedjilani
Active Member
New Addition - Haddon's Carpet Anemone, Green (Stichodactyla haddoni)
My double banded clown hosted it after two days....
OP
OP
syedjilani
Active Member
Apex Lite Programming with Tunze 6150 via VDM
So guys.... My tank reached here.... Hope you like the update and will put your valuable suggestions.
I Got VDM Module to get full benefit from my Apex and program different water movement with my Tunze 6105"s. So what I did is.
My programming for these things has gotten pretty complex. My goal was to create a chaotic flow during hours that the lights are on with a wind up and wind down period before and after the lights go on or off. Additionally, I wanted a calm period when the lights are off. What I have done is created a number of profiles that include various chaotic flow patterns as well as a calm pattern when the lights are off and the wind up and wind down pattern.
I added additional profiles for more flow patterns.
My current profiles are:
Wave1 (This is my main daylight wave pattern)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100
Dusk Dawn(This is a lower flow wave pattern used intermittently during the light hours as well as before and after lights go out)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 30
Night (Sets a constant 30% flow during light off hours)
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 10
Off time (Seconds) 15
Minimum intensity 30
Maximum intensity 30
These are the variable speed pumps and their programming:
StreamLt
Set Wave1
If Time 10:30 to 11:59 Then DuskDawn
If Time 12:00 to 20:00 Then Wave1
If Time 20:01 to 21:00 Then DuskDawn
If Time 21:01 to 10:29 Then Night
StreamRt
Set Wave1
If Time 10:30 to 11:59 Then DuskDawn
If Time 12:00 to 20:00 Then Wave1
If Time 20:01 to 21:00 Then DuskDawn
If Time 21:01 to 10:29 Then Night
For those that are just diving in to variable speed pumps with the Apex, I hope this helps you out!
So guys.... My tank reached here.... Hope you like the update and will put your valuable suggestions.
I Got VDM Module to get full benefit from my Apex and program different water movement with my Tunze 6105"s. So what I did is.
My programming for these things has gotten pretty complex. My goal was to create a chaotic flow during hours that the lights are on with a wind up and wind down period before and after the lights go on or off. Additionally, I wanted a calm period when the lights are off. What I have done is created a number of profiles that include various chaotic flow patterns as well as a calm pattern when the lights are off and the wind up and wind down pattern.
I added additional profiles for more flow patterns.
My current profiles are:
Wave1 (This is my main daylight wave pattern)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100
Dusk Dawn(This is a lower flow wave pattern used intermittently during the light hours as well as before and after lights go out)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 30
Night (Sets a constant 30% flow during light off hours)
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 10
Off time (Seconds) 15
Minimum intensity 30
Maximum intensity 30
These are the variable speed pumps and their programming:
StreamLt
Set Wave1
If Time 10:30 to 11:59 Then DuskDawn
If Time 12:00 to 20:00 Then Wave1
If Time 20:01 to 21:00 Then DuskDawn
If Time 21:01 to 10:29 Then Night
StreamRt
Set Wave1
If Time 10:30 to 11:59 Then DuskDawn
If Time 12:00 to 20:00 Then Wave1
If Time 20:01 to 21:00 Then DuskDawn
If Time 21:01 to 10:29 Then Night
For those that are just diving in to variable speed pumps with the Apex, I hope this helps you out!
AwesomeDempseys
New Member
All this is very interesting and I like how detail oriented you are while planning and executing this setup.
revhtree
Owner Administrator
Staff member
Super Moderator
Reef Squad
Partner Member 2024
Excellence Award
RGB
Photo of the Month
Article Contributor
R2R TV Featured
Hospitality Award
Article Administrator
Black Friday Sponsor
Partner Sponsor 2023
Industry Professional
My Aquarium Showcase
- Joined
- May 8, 2006
- Messages
- 47,964
- Reaction score
- 88,821
Very nice!
Daniel@R2R
Living the Reef Life
Staff member
Super Moderator
Reef Squad
Partner Member 2024
Excellence Award
Photo of the Month
Article Contributor
Hospitality Award
Article Administrator
Reef Pumpkin Carver
R2R Secret Santa 2023
My Tank Thread
This is a REALLY awesome build! I'm inspired to try lots of diy stuff that I keep telling myself I can't do. Lol This is amazing! Following along!
OP
OP
syedjilani
Active Member
Thank you AwesomeDempseys.
OP
OP
syedjilani
Active Member
Thank you revhtree
OP
OP
syedjilani
Active Member
Thank you mdbannister. you know 3Ds and planning took a lot of time.
OP
OP
syedjilani
Active Member
Thank you Beradd.
Similar threads
New Posts
-
-
Protein skimmer making micro bubbles in display HELP!- Latest: ajremington68
-
-
