Tired of AC bricks? Try the DCBuddy

EeyoreIsMySpiritAnimal

Just another girl who likes fish
View Badges
Joined
May 14, 2019
Messages
14,385
Reaction score
21,281
Location
Spring, Texas
Rating - 0%
0   0   0
Sure thing!

Step 1: Plug in 200W power supply, plug in to the DCBuddy.
Step 2: Unplug all your VorTech, Gyre, DC skimmer, etc power supplies and put them in storage. The main use case is 24V equipment - most DC pumps and power heads run on 24V.
Step 3: Plug the VorTech, Gyres, etc (any 24V equipment) into the DCBuddy.
Step 4: Enjoy all the space and outlets you got back.

Step 5-N: If you use Home Assistant, get current monitoring and on/off control from the HA UI. Or browse to the local web page and get the same. Or just ignore this function entirely!

Coming soon is redundant power supplies, 12V output, and battery backup.
Tyvm!
 

MikeTheNewbie

Active Member
View Badges
Joined
Aug 16, 2020
Messages
424
Reaction score
277
Location
Michigan
Rating - 100%
1   0   0
@theatrus, kudos on so many levels!
  • it is amazing to see the speed at which your project is progressing. You have gone from concept to prototype in just a few days.
  • Your progress posts are educational and very entertaining
  • The way you accept feedback and don't engage in arguments when someone suggests a different approach
  • Your open source and community spirit is commendable
I noticed you have a site where you might be selling these. I wish you success and I hope you continue working on this project.
I think there is a market for this , especially among people that can see the evolution of the project or want to support open source.
I wish this project split in two, an even more feature-packed, over engineered and exciting flagship for halo effect and a cost optimized one for mass adoption. (If anything in reefing can be considered mass adoption).
Cheers!
 

MikeTheNewbie

Active Member
View Badges
Joined
Aug 16, 2020
Messages
424
Reaction score
277
Location
Michigan
Rating - 100%
1   0   0
Some teasers, as the prototypes showed up today:

IMG_5944.jpeg

IMG_5949.jpeg

IMG_5957.jpeg


IMG_5958.jpeg

1715830940064.png
Btw, that is some serious electronics equipment. Are you at school? Maker space? Work :O ?
 

Adamc13o3

Active Member
View Badges
Joined
Nov 21, 2014
Messages
485
Reaction score
226
Location
Miami Beach, FL
Rating - 100%
1   0   0
@theatrus, kudos on so many levels!
  • it is amazing to see the speed at which your project is progressing. You have gone from concept to prototype in just a few days.
  • Your progress posts are educational and very entertaining
  • The way you accept feedback and don't engage in arguments when someone suggests a different approach
  • Your open source and community spirit is commendable
I noticed you have a site where you might be selling these. I wish you success and I hope you continue working on this project.
I think there is a market for this , especially among people that can see the evolution of the project or want to support open source.
I wish this project split in two, an even more feature-packed, over engineered and exciting flagship for halo effect and a cost optimized one for mass adoption. (If anything in reefing can be considered mass adoption).
Cheers!
What’s the site? I read the entire thread and must have missed it.
 
OP
OP
theatrus

theatrus

Valuable Member
View Badges
Joined
Mar 26, 2016
Messages
2,227
Reaction score
3,639
Location
Sacramento, CA area
Rating - 0%
0   0   0
When can we buy this?

I need to do a few more tests and re-review the pricing sheet, but from this first batch I'll make a few early access units available soon, and then a larger lot will fast follow. I'll add you to my ping list when I enable buying.

Btw, that is some serious electronics equipment. Are you at school? Maker space? Work :O ?

Garage-turned-lab-space "office". Gotta test to have confidence, though if you asked me if I would buy a new tank+s worth of electronic loads a few months ago I'd have also questioned my own sanity as well.


Also going to post user guides at https://reefvolt.com - both getting updates in the following weeks.
 
OP
OP
theatrus

theatrus

Valuable Member
View Badges
Joined
Mar 26, 2016
Messages
2,227
Reaction score
3,639
Location
Sacramento, CA area
Rating - 0%
0   0   0
@theatrus, kudos on so many levels!
  • it is amazing to see the speed at which your project is progressing. You have gone from concept to prototype in just a few days.
  • Your progress posts are educational and very entertaining
  • The way you accept feedback and don't engage in arguments when someone suggests a different approach
  • Your open source and community spirit is commendable
I noticed you have a site where you might be selling these. I wish you success and I hope you continue working on this project.
I think there is a market for this , especially among people that can see the evolution of the project or want to support open source.
I wish this project split in two, an even more feature-packed, over engineered and exciting flagship for halo effect and a cost optimized one for mass adoption. (If anything in reefing can be considered mass adoption).
Cheers!

Thanks for the kind words! I'm lucky enough to not be purely profit focused and would rather have good products and understand what we are doing. If someone can scale this better than I can (possible!) I'm more than happy to work with them or let them run at it - since its probably going to happen anyway. More competition is good, but I'd rather make sure everything can work with everything else.

I agree on different tiers, but there is a floor thats safe here. The simplest model is just a bunch of wires with an input and a bunch of outputs, but electronics are designed with the AC brick they are shipped with as well. If you attach a much larger supply, and something goes wrong in a pump controller, its probably designed to handle a fault which is matched to its power brick. For example, it can survive not melting down and expects the power brick to limit it to 5A. If you suddenly give it 20A and it faults, a lot more bad things can happen.

This safety concern sets the floor for this type of product - it needs over-current protection at a reasonable current level in order to match the expectations of what you're plugging into it.
 

Memoreefs

Well-Known Member
View Badges
Joined
Feb 5, 2018
Messages
538
Reaction score
122
Rating - 0%
0   0   0
This is really unique. I am guessing it's similar to the Hydro's system that supports multiple 24v outputs. May reefers use power output 36v on power pumps, wavemakers, etc. It would be nice if we can indeed eliminate multiple 36V power bricks.
 
OP
OP
theatrus

theatrus

Valuable Member
View Badges
Joined
Mar 26, 2016
Messages
2,227
Reaction score
3,639
Location
Sacramento, CA area
Rating - 0%
0   0   0
This is really unique. I am guessing it's similar to the Hydro's system that supports multiple 24v outputs. May reefers use power output 36v on power pumps, wavemakers, etc. It would be nice if we can indeed eliminate multiple 36V power bricks.

With a 36V supply the current DCBuddy will still operate and provide full functionality for some 36V loads. There is a per port power limit here which means some of the larger pumps won't be suitable, but on my roadmap is a higher per-port power option. I'd like to consolidate some Vectra pumps myself :)
 

Minifoot77

Jack of all trades and a master of none
View Badges
Joined
Jul 3, 2022
Messages
1,039
Reaction score
1,494
Location
Ottawa
Rating - 0%
0   0   0
With a 36V supply the current DCBuddy will still operate and provide full functionality for some 36V loads. There is a per port power limit here which means some of the larger pumps won't be suitable, but on my roadmap is a higher per-port power option. I'd like to consolidate some Vectra pumps myself :)
I think all the ai lights are 36v as well 90w or so...
 
OP
OP
theatrus

theatrus

Valuable Member
View Badges
Joined
Mar 26, 2016
Messages
2,227
Reaction score
3,639
Location
Sacramento, CA area
Rating - 0%
0   0   0
I think all the ai lights are 36v as well 90w or so...

Lights start pushing the boundary of usefulness, as the main supply starts getting really large. Many also use different voltages (48V, 54V, etc) but as you said some are on 36V. I think this is a diminishing return especially for more powerful lights, but worth keeping in mind.
 

Minifoot77

Jack of all trades and a master of none
View Badges
Joined
Jul 3, 2022
Messages
1,039
Reaction score
1,494
Location
Ottawa
Rating - 0%
0   0   0
Lights start pushing the boundary of usefulness, as the main supply starts getting really large. Many also use different voltages (48V, 54V, etc) but as you said some are on 36V. I think this is a diminishing return especially for more powerful lights, but worth keeping in mind.
I use the ai hydra 26hds...
 

MikeTheNewbie

Active Member
View Badges
Joined
Aug 16, 2020
Messages
424
Reaction score
277
Location
Michigan
Rating - 100%
1   0   0
Garage-turned-lab-space "office". Gotta test to have confidence, though if you asked me if I would buy a new tank+s worth of electronic loads a few months ago I'd have also questioned my own sanity as well.
LOL, a hobby within a hobby. I know what you mean. I got a little tinker lab too, light on the electronics but went crazy on the 3D printers. Got 5 so far. Anyone would think I have a business around that.
 

MikeTheNewbie

Active Member
View Badges
Joined
Aug 16, 2020
Messages
424
Reaction score
277
Location
Michigan
Rating - 100%
1   0   0
Hey @theatrus sign me up for the early builds too I have a space that would greatly benefit from some streamlining.

2 of the Vortechs are currently plugged to a lead acid deep cycle battery with a trickle charger. I'd love to integrate that too. Did you say the battery back up you were planning was an add on module or was it for a future version?

1000013765.jpg
 
OP
OP
theatrus

theatrus

Valuable Member
View Badges
Joined
Mar 26, 2016
Messages
2,227
Reaction score
3,639
Location
Sacramento, CA area
Rating - 0%
0   0   0
Hey @theatrus sign me up for the early builds too I have a space that would greatly benefit from some streamlining.

2 of the Vortechs are currently plugged to a lead acid deep cycle battery with a trickle charger. I'd love to integrate that too. Did you say the battery back up you were planning was an add on module or was it for a future version?

1000013765.jpg

Will ping you in a day or two with details :). Two lots are being planned, a few weeks apart in availability.

The battery module is an add-on and being worked on. There are some firmware changes needed to use it especially with the Vortech 12V support - each outlet has a battery mode and allowable voltage range, letting some outlets power up at 12V, or run the battery at 24V and only turn on critical outlets. This should be updateable OTA or worst case over USB.
 

biznatch

Community Member
View Badges
Joined
Nov 30, 2023
Messages
32
Reaction score
24
Location
CA
Rating - 0%
0   0   0
Any possibility of adding per port float valve shut offs similar to robotank? That is a great feature to physically cut power in case of chip/sensor failure.
 

TOP 10 Trending Threads

WHICH OF THESE CREEPY REEF CRITTERS IS MOST LIKELY TO GIVE YOU NIGHTMARES? (PICTURED IN THE THREAD)

  • The Bobbit Worm

    Votes: 47 65.3%
  • The Goblin Shark

    Votes: 4 5.6%
  • The Sea Wolf

    Votes: 0 0.0%
  • Giant Spider Crabs

    Votes: 1 1.4%
  • The Stargazer Fish

    Votes: 5 6.9%
  • The Giant Isopod

    Votes: 9 12.5%
  • The Giant Squid

    Votes: 1 1.4%
  • Other (Please explain!)

    Votes: 5 6.9%
Back
Top