Ry-guy93
New Member
Starting on my first ever salt water tank I'm excited to start this journey and I welcome all and any comments and feed back this is the tank and location of my set up i will keep updates on my journey
First ever salt water build with a 10 gal tank
- Nano Build
- Thread starter Ry-guy93
- Start date
- Tagged users None
Excited to see where you take it! Congrats on making the jump into saltwater!
Gumbies R Us
Certified Noob
Following along!
OP
OP
Ry-guy93
New Member
KeremAltinbasak
Community Member
Hey!
It looks nice, but I think you were in a bit of a hurry to add live
What is the status of your diatom process? I couldn't understand it from the picture. Have you done any tests? If so, can you share the results?
Be careful with the anemone, it may get stuck in the wave motor and break apart.
It looks nice, but I think you were in a bit of a hurry to add live
What is the status of your diatom process? I couldn't understand it from the picture. Have you done any tests? If so, can you share the results?
Be careful with the anemone, it may get stuck in the wave motor and break apart.
OP
OP
Ry-guy93
New Member
I had the exact same thought about the live rock and anemone but the guy at aqua hut said there's no waiting period and I was just being way to caution he stated I can add the rock and the anemone right away and all I had to do was put phyto plankton a cap full every other day and about the least results i can re test when I get home I had taken a sample to aqua hut and he said everything was good to go but never gave any parametersHey!
It looks nice, but I think you were in a bit of a hurry to add live
What is the status of your diatom process? I couldn't understand it from the picture. Have you done any tests? If so, can you share the results?
Be careful with the anemone, it may get stuck in the wave motor and break apart.
KeremAltinbasak
Community Member
Hmm, it's a bit interesting. Generally, if you add water from the already installed tank and re-install it, a process usually starts in all new tanks. This usually starts around 15-20 days into the tank. In this process, bacteria do their job and the ammonia-nitrite-nitrate-nitrogen balance in the water is established. In this process, it is not recommended to add living creatures as the water is slightly toxic. Fish can tolerate it a little, but the important thing here is of course to do the tests regularly and check them.
It would still be better if you get tests to check and follow up yourself. Anemones are slightly different creatures, keep an eye on them as they may melt or split.
KeremAltinbasak
Community Member
Also, I just realized that there is no protein skimmer, right?
I definitely recommend you get one. Since there is no sump, it will be the heart of your tank.
You can use hanger type ones(qq1, dophin2012) or there are some models that work outside.
I definitely recommend you get one. Since there is no sump, it will be the heart of your tank.
You can use hanger type ones(qq1, dophin2012) or there are some models that work outside.
Good start, but go slow with livestock, you are stocking too soon after filling the tank with water. Don't trust the LFS people, always double and triple check what they say, or what anyone says for that matter. The tank needs more rock, should be about 35-45 lbs of rocks, and more flow. My 40 breeder has 50 lbs of rock, and 2 gyres running at 50%.. rocks and flow are the basis of the saltwater tank. It looks like your only filtration is a hob filter, this is not much filtration so keep a very low bioload unless you increase the filtration. You have basically built a freshwater tank, which will be very challenging as a saltwater tank. Do more reading and research always.
The water surface looks very still. You should have a powerhead pointed at the surface to agitate it and help with gas exchange, you need to oxygenate the water, this is more important and than in freshwater. A protein skimmer is the best way to oxygenate the water and also provides good filtration.
PS- just trying to give you pointers for improving, not meaning to sound critical, sorry if it comes off that way.
The water surface looks very still. You should have a powerhead pointed at the surface to agitate it and help with gas exchange, you need to oxygenate the water, this is more important and than in freshwater. A protein skimmer is the best way to oxygenate the water and also provides good filtration.
PS- just trying to give you pointers for improving, not meaning to sound critical, sorry if it comes off that way.
Last edited:
Not saying you will, but the trend is usually folks starting off to overstock, especially with the first tank....
I would strongly recommend getting specific species info from academic/non-hobby related articles...IME/IMO even experienced hobbyist grossly underestimate the size potential of wild collected stock (as often adults are avoided/not collected)
... another thing to watch: just because someone wrote it in a "supposedly" respected publication/video does not guarantee accurate info
Best wishes on this endeavor
I would strongly recommend getting specific species info from academic/non-hobby related articles...IME/IMO even experienced hobbyist grossly underestimate the size potential of wild collected stock (as often adults are avoided/not collected)
... another thing to watch: just because someone wrote it in a "supposedly" respected publication/video does not guarantee accurate info
Best wishes on this endeavor
Yes the maxspec will work.
I am not familiar with that skimmer, there is past review on here as below, seems to be ok. Not sure what the budget is, but Aquareaddy 1.5 is a great hob unit
Aquatop Xyclone Protein Skimmer, 370 gph
Was looking to purchase this protein skimmer for Black Friday sales and was wondering if anyone uses/used this skimmer could tell me if it’s good or not. I have a 20g long tank. Or if there are other models for a bit more that you would recommend. I know they can get expensive but I’m just...
www.reef2reef.com
OP
OP
Ry-guy93
New Member
Ok I just ordered the maxspec wont be in for a few weeks I guess I can put in another Hydor Circulation pump for nowYes the maxspec will work.
I am not familiar with that skimmer, there is past review on here as below, seems to be ok. Not sure what the budget is, but Aquareaddy 1.5 is a great hob unit
Aquatop Xyclone Protein Skimmer, 370 gph
Was looking to purchase this protein skimmer for Black Friday sales and was wondering if anyone uses/used this skimmer could tell me if it’s good or not. I have a 20g long tank. Or if there are other models for a bit more that you would recommend. I know they can get expensive but I’m just...
Similar threads
TOP 10 Trending Threads
-
- Sticky
- Poll
