- Joined
- May 7, 2019
- Messages
- 117
- Reaction score
- 81
About a year ago I discovered that vermatids had infested my reef tank. I got several batches of bumblebee snails, and they're slowly taking care of the issue in the tank - about a quarter of the vermatid shells in the tank are now gone.
But a couple of months ago I noticed that the vermatids were also growing on the outside of the pipe that runs from my tank to the sump, right where the pipe enters the sump. Sorry its so ugly, but see picture below:
And today I discovered that they're also growing in the overflow box in the same manner - on the outside of the pipe! Don't have a pic of that, but you can imagine.
I've tried to remove them from the pipes in both areas with a metal brush and a screwdriver, but that didn't work too well - the shells are very hard and the pipes are in a very small area and difficult to reach.
After doing some research on this, I decided to cut my daily feeding amount by half and use some coral snow to starve and (hopefully) kill off the vermatids. But I have a few questions that I haven't been able to find answers to:
1. If the actual vermatid worms are killed, will their shells eventually dissolve? Or is manual removal of the shells necessary to get the shells to disappear?
2. Should I be worried about a vermatid infestation inside of the pipes? I'm thinking that if I see this many worms on the outside of the pipes there may be the same amount on the inside of the pipes, and possibly also in my skimmer and return motor.
3. Should I get a batch of bumblebee snails to put in the overflow box and sump return section? Will they survive? Will they consume the excess shells, or just the worms?
Any help that you all could give me would be appreciated!
But a couple of months ago I noticed that the vermatids were also growing on the outside of the pipe that runs from my tank to the sump, right where the pipe enters the sump. Sorry its so ugly, but see picture below:
And today I discovered that they're also growing in the overflow box in the same manner - on the outside of the pipe! Don't have a pic of that, but you can imagine.
I've tried to remove them from the pipes in both areas with a metal brush and a screwdriver, but that didn't work too well - the shells are very hard and the pipes are in a very small area and difficult to reach.
After doing some research on this, I decided to cut my daily feeding amount by half and use some coral snow to starve and (hopefully) kill off the vermatids. But I have a few questions that I haven't been able to find answers to:
1. If the actual vermatid worms are killed, will their shells eventually dissolve? Or is manual removal of the shells necessary to get the shells to disappear?
2. Should I be worried about a vermatid infestation inside of the pipes? I'm thinking that if I see this many worms on the outside of the pipes there may be the same amount on the inside of the pipes, and possibly also in my skimmer and return motor.
3. Should I get a batch of bumblebee snails to put in the overflow box and sump return section? Will they survive? Will they consume the excess shells, or just the worms?
Any help that you all could give me would be appreciated!