SBB - 500 Auctions Up! Starting at $1

[Reefing_addiction]

Mandarins are really ignored by everything. I'd say it is a high chance of doing fine.

This….no one - not even Mr Purple-bothers the mandarin

 

[Kasrift]

My mandarin can literally perch on the starry blenny's head and he won't even notice, despite the fact that the blenny is my tank's bully.

 

[stoney7713]

I broke down the model and added some more holes and my magnet sizes @Thuan the holder(not counting the madnet is 6x4 inches when closed

 

[BasementBox]

Mandarins are really ignored by everything. I'd say it is a high chance of doing fine.

Well. If it is still there I’ll see if I can do it a solid.

 

[Thuan]

I broke down the model and added some more holes and my magnet sizes @Thuan the holder(not counting the madnet is 6x4 inches when closed

Looks good. Can you make one with smaller holes. I'm thinking frozen food so cb can peck at it

 

[stoney7713]

@Reefing_addiction holes large enough?

 

[andrewj1212]

Show me the meat. Went to store to get roast on sale fir $4.87/lb. They always have small portion every yr. This yr, they don't. Was going to split it with this lady I'm the store, but butcher said they can't cut it.
So I and another customer grab the only 2 left. I'll split ith my brother

 

[stoney7713]

Looks good. Can you make one with smaller holes. I'm thinking frozen food so cb can peck at it

I actually had an old design from my last CB it was a cylinder with holes. It's follows the recommended CB feeders.

 

[Thuan]

Oh my. Cut out bones for ribs and other cuts. Sane place I got it

 

[stoney7713]

 

[Thuan]

I get to cut and divide my 24 lbs tomorrow

 

[Peanut]

Gainesville- ups finally showed up at 10pm last night

Go Gators!!!! my alma mater and my son currently a senior graduating in May

 

[Peanut]

I actually had an old design from my last CB it was a cylinder with holes. It's follows the recommended CB feeders.

prices are insane. this is why I bought a printer. shades for my lights paid for 1/2 of it alone.

 

[Kasrift]

Well. If it is still there I’ll see if I can do it a solid.

Fun part is they aren't super susceptible to ich or anything since they are scaleless and have a mucous coat. One of the only fish I didn't run through a quarantine protocol. I did a fresh water dip to check for flukes and that was it.

 

[stoney7713]

prices are insane. this is why I bought a printer. shades for my lights paid for 1/2 of it alone.

Yeah the CB feeders, I probably wouldn't even charge half that for them. And I probably would be using better magnets too

 

[Reefing_addiction]

@stoney7713 @Peanut

Recommendations on a 3D printer?

And

What do you think is the best printer out there?

 

[Peanut]

@stoney7713 @Peanut

Recommendations on a 3D printer?

And

What do you think is the best printer out there?

Bambu P1S will do everything you can imagine. I love mine.

The Bambu X1C is their top of the line, but I bought most of the part to upgrade my P1S to parts the X1C comes with for around $50. Hardened Steel Nozzle and Gears vs the Stainless Steel versions it came with. Allows for a wider range of material that you can print with. At that point the only thing the X1C has that the P1S doesnt is a better camera for timelapses and lidar for first layer spaghetti detection. Unless you have a farm of printers you can't watch print, I didn't see the need.

I bought mine 3 months ago or so and already have over 900 hours printed.

https://us.store.bambulab.com/

 

[Peanut]

@stoney7713 @Peanut

Recommendations on a 3D printer?

And

What do you think is the best printer out there?

And I would def get the combo with the AMS. It's amazing. I just ordered a 2nd one for my printer on black friday.

 

[Reefing_addiction]

Bambu P1S will do everything you can imagine. I love mine.

The Bambu X1C is their top of the line, but I bought most of the part to upgrade my P1S to parts the X1C comes with for around $50. Hardened Steel Nozzle and Gears vs the Stainless Steel versions it came with. Allows for a wider range of material that you can print with. At that point the only thing the X1C has that the P1S doesnt is a better camera for timelapses and lidar for first layer spaghetti detection. Unless you have a farm of printers you can't watch print, I didn't see the need.

I bought mine 3 months ago or so and already have over 900 hours printed.

https://us.store.bambulab.com/

I see Enders for sale on Facebook marketplace quite frequently which makes me wonder about them

 

[Peanut]

I see Enders for sale on Facebook marketplace quite frequently which makes me wonder about them

its all the people that just bought a Bambu lol