This is the third time I've started a build thread so we'll see if I succeed. The first one my badge disappeared so I did another and sure enough my badge disappeared again. I didn't bother restoring the badges because I figured it was punishment for me being so poor at updating the threads I'll try to do better this time but no promises If this one disappears I'll take that as a sign.
New Tank is a Waterbox LX 330.7 I was going to go custom with a basement sump but decided I really didn't feel like doing the plumbing plus I'm getting tired of running up and down the stairs, sump is currently in the basement. I went with Waterbox because I was able to get the exact size I wanted. I really wanted at least 7ft of length and especially wanted the 30 inch front to back depth. The total height is more than I wanted but it was compromise or go full custom.
I want to keep my rodi storage and mixing station in the basement so figuring out how to keep that there and get water to the first floor will be part of the build. I'll be transferring most of the stuff from my 180g to the new tank. I'll do a full equipment list later.
Current tank that will be replaced
Delivery day
In with the stand. I was able to use the tractor to get it level with the entry way and slide it into the house and up onto a couple of furniture dollies. Rolled it into position and lifted it off. Easy peasy.
Time for the sump. Did it the same as the stand, up and in. Man I love the salesman that suggested adding the forks when I bought the tractor.
We set the tank today but didn't get pics. I had to help get it in and my Gal stayed in the bedroom. She said she couldn't stand to watch I hired a moving company to move the tank. First time in my life I've paid anyone to move anything. It was hard as I'm a do it yourself and usually do it alone kind of guy. I wish I would have hired laborers and ran the job myself. I wanted to bring it in the same as the stand and sump using the tractor sliding it in onto dollies then roll it to the stand and lift it on. Boss man wanted to lift into the house and it took all 5 of them and myself to do it. 604lbs ya I would have opted for the tractor but they were in charge. The door opening was 31" and tank 29.5" so it was tight but we made it in unscathed and up onto the stand. My arms are sore today.
After everyone left my Gal came out. Her first statement "wow it's big" It is big and makes the 180g look small. It's amazing how much difference the extra 6" of depth makes. I'm looking forward to scaping this. The tangs are gonna love the extra swim space.
Sump is in the stand now onto plumbing. You can see the two electrical outlets I added. I ran a dedicated circuit on its own breaker and attached the outlets to the wall, one outside on the end toward the corner and the second where I can reach it from inside the stand.
Leveled. I used a 4ft bubble level but really didn't have 100% confidence as the bubbles are a little hard for me to see. I added about 3/4" of tap water and checked the waterline. Nice and level.
Plumbing in and doors are on.
Next up to get lumber and build a beam and shore up the joists.
The tank is sitting perpendicular to the floor joists and the back almost on top of the house center beam. It would probably be fine but I already have two extra pole jacks so I'm going to build and run a support beam parallel to the center beam about 24" away which will give plenty of support I think.
More to follow.
New Tank is a Waterbox LX 330.7 I was going to go custom with a basement sump but decided I really didn't feel like doing the plumbing plus I'm getting tired of running up and down the stairs, sump is currently in the basement. I went with Waterbox because I was able to get the exact size I wanted. I really wanted at least 7ft of length and especially wanted the 30 inch front to back depth. The total height is more than I wanted but it was compromise or go full custom.
I want to keep my rodi storage and mixing station in the basement so figuring out how to keep that there and get water to the first floor will be part of the build. I'll be transferring most of the stuff from my 180g to the new tank. I'll do a full equipment list later.
Current tank that will be replaced
Delivery day
In with the stand. I was able to use the tractor to get it level with the entry way and slide it into the house and up onto a couple of furniture dollies. Rolled it into position and lifted it off. Easy peasy.
Time for the sump. Did it the same as the stand, up and in. Man I love the salesman that suggested adding the forks when I bought the tractor.
We set the tank today but didn't get pics. I had to help get it in and my Gal stayed in the bedroom. She said she couldn't stand to watch I hired a moving company to move the tank. First time in my life I've paid anyone to move anything. It was hard as I'm a do it yourself and usually do it alone kind of guy. I wish I would have hired laborers and ran the job myself. I wanted to bring it in the same as the stand and sump using the tractor sliding it in onto dollies then roll it to the stand and lift it on. Boss man wanted to lift into the house and it took all 5 of them and myself to do it. 604lbs ya I would have opted for the tractor but they were in charge. The door opening was 31" and tank 29.5" so it was tight but we made it in unscathed and up onto the stand. My arms are sore today.
After everyone left my Gal came out. Her first statement "wow it's big" It is big and makes the 180g look small. It's amazing how much difference the extra 6" of depth makes. I'm looking forward to scaping this. The tangs are gonna love the extra swim space.
Sump is in the stand now onto plumbing. You can see the two electrical outlets I added. I ran a dedicated circuit on its own breaker and attached the outlets to the wall, one outside on the end toward the corner and the second where I can reach it from inside the stand.
Leveled. I used a 4ft bubble level but really didn't have 100% confidence as the bubbles are a little hard for me to see. I added about 3/4" of tap water and checked the waterline. Nice and level.
Plumbing in and doors are on.
Next up to get lumber and build a beam and shore up the joists.
The tank is sitting perpendicular to the floor joists and the back almost on top of the house center beam. It would probably be fine but I already have two extra pole jacks so I'm going to build and run a support beam parallel to the center beam about 24" away which will give plenty of support I think.
More to follow.
Last edited: