Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hi Guy's I'm looking for a place to buy a duel stage reg with no solenoid valve to hook up to a deltic Twin-Tech 1500 cal reactor.
I've checked a few places and nothing
the manual only states a duel state the unit has it's own solenoid valve built in and does its own monitoring you don't even require a PH probe. I'm located in canada thanks water dogSo you just need a dual stage regulator with no solenoid, right? How about the metering valve, is that necessary? Are you in the states or somewhere else? That will determine what CO2 fitting is required. Lemme know and I’ll PM you some options. EBay will be your best bet.
could you post the model number you bought i'm guessing if I get one with a solenoid valve i could remove it or leave it plugged inI’ve just purchased the Twin Tech 1500 and I also got the DD Regulator as well with it if you can get that were you are
And welcome to R2R as well!
the manual only states a duel state the unit has it's own solenoid valve built in and does its own monitoring you don't even require a PH probe. I'm located in canada thanks water dog
This is it, and it doesn’t have a Solonoid valvecould you post the model number you bought i'm guessing if I get one with a solenoid valve i could remove it or leave it plugged in
This is it, and it doesn’t have a Solonoid valve
CO2 Regulator and needle valve | D-D The Aquarium Solution
www.theaquariumsolution.com
I’m not ‘technically minded’ although I appreciate the difference, but it’s the one recommended by DD for their Twin Tech 1500 Calcium Reactor.that looks like a single stage regulator
Straight from the ‘horses mouth’ a reply from one of the ‘Tank Masters’ at DD in literally minutes, that’s support for you!that looks like a single stage regulator
The Twin Tech comes with a low voltage solenoid valve as standardFWIW, the Deltec Twin Tech 1500 requires a 2 stage regulator, as it does not use a solenoid or metering valve...
Not included
- CO2 bottle, CO2 regulator (important, 2 stage regulator is required) and CO2 hose.
- Calcium reactor media.
Twin Tech Calcium Reactors
Introduction Twin-Tech Calcium Reactors Introducing the latest generation Deltec Twin-Tech Calcium Reactor, introduced by Reefbuilders as the “Supercar of Calcium Reactors” Calcium reactors still remain the easiest and most stable method for making additions to the reef aquarium, requiring...battlecorals.com
The Twin Tech comes with a low voltage solenoid valve as standard
Straight from the ‘horses mouth’ a reply from one of the ‘Tank Masters’ at DD in literally minutes, that’s support for you!
‘Our regs are dual stage. The first stage knocks the native bottle pressure down to around 60 bar and then a secondary coarse adjustment allows adjustment of pressure between 0-4 bar , we suggest setting this to 2 bar for the twin tech.
It sounds like they’re just churching up the purpose of the two gauges. Because what they’re saying doesn’t describe how a dual stage worksFWIW, 60 bar is 870 psig. That is pretty much the bottle pressure. Not sure there is really a first stage at all.