Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hi,new to here as of today,I have 2 kessil 360 we over my 150 (48x24x30) have had them now since March,I purchased the controller as well..question is what's your light settings at? They are pre set options,currently using option 1,after acclimated what's your recommendation?
My corals have been growing extremely well. So well that I decided to add a small frag tank to my system. I had a custom rimless built to fit some space on the desk next to the display refugium. The tank is 36"x20"x12" and has a corner overflow. I plumbed it into my main system last weekend. I'm using a GHL Mitra 6200 to light it up. I have that mounted to the underside of the cabinet above the tank using an articulating mount much like the ones I use for my Kessils over my main display.
Since it was being plumbed into the existing drain from the display refugium, I had to align the PVC WYE (the 3 way drain connection between the fuge and frag tank) with the drain bulkhead union on the display refugium.
This the WYE that ties the frag tanks drain into the display refugiums drain. That union fitting connects to the double union ball valve on the display refugiums drain.
You can see where it connects under the display refugium in this picture.
This is looking behind the display refugium where the frag tanks drain will ultimately connect to the main drain going back to the return section of the big refugium below my main display.
The drain and feed line between the display refugium and the frag tank. It's not far from the wall at all. I may paint the line wall color which will help it disappear.
The connections below the new frag tank.
I moved my Profilux over to the frag system. It happened that I had a nice little shelf for the Profilux under one of the cabinets. The cubby used to be occupied by a power distribution controller for my computer. That is long gone and the Profilux fit the space perfectly. I mounted the Profilux touch display to the wall next to the frag tank. The Profilux controls the Mitra as well as my Tunze and serves as a second monitor to my system. A bit of redundancy to my Apex from a monitoring standpoint. I still need to mount the Profilux power bar in the cabinet but I will do that later. I also finished my frag racks.
A couple shots of the fish room.